Guide for Authors

Articles must be submitted through the Online Submissions and Peer-Review System (

All articles published in Journal of Modern Processes in Manufacturing and Production are open access and freely available online, immediately upon publication. This is made possible by an article-processing charge (APC) that covers the range of publishing services we provide. This includes provision of online tools for editors and authors, article production and hosting, liaison with abstracting and indexing services, and customer services. Therefore, publishing an article in the Journal requires review fee, 1,500,000 IR Rial and publication fee, 3,500,000 IR Rial, that will be billed to the corresponding author following the review or acceptance of an article for publication.


-It should be noted that any payment of Review and Acceptance fees through methods other than the online payment portal of the journal is not acceptable.

Also, to pay online through the journal payment gateway, you only need to use browsers other than Google Chrome, such as Firefox.

-The Journal exploits plagiarism checker (iThenticate) to verify the originality of the articles.

The authors should upload four files:

1-  A file that only included the title of manuscript and the names of authors and their e-mails and addresses as the Title Page file.

2-  A file that included the manuscript title, abstract, keywords, text with all tables and figures without the names of authors and their e-mails and addresses as the manuscript main file (Without Authors Name).

All articles must be written in English. Scripts should be submitted typewritten, single column in Times New Roman size 12 font and not more than 15 pages.

-    Manuscript shall be formatted for an A4 size page.

-    The top, left and right margins shall be 30 mm.

-    The bottom margin shall be 25 mm.

3- The corresponding author has to complete the Conflicts of Interest Form (فرم تعارض منافع) and send via email simultaneously with the submission of the paper

4. The corresponding author has to complete Copyright form and send via email simultaneously with the submission of the paper 

Article structure

A)     Subdivision - numbered sections

Divide your article into clearly defined and numbered sections. Subsections should be numbered 1.1 (then 1.1.1, 1.1.2 ...), 1.2, etc. (the abstract is not included in section numbering). Any subsection may be given a brief heading. Each heading should appear on its own separate line. A bold font should be used for section headings.

B)      Title:

Essential title information:

• A short title, not to exceed 50 letter spaces, should be included on a separate sheet, to be used as the running headline for the article. A bold font should be used for manuscript title.

• Author names and affiliations. Please clearly indicate the given name(s) and family name(s) of each author (all in font size 12 pt) and check that all names are accurately spelled. Present the authors' affiliation addresses (all in font size 10 pt) below the names. Indicate all affiliations with a lower-case superscript letter immediately after the author's name and in front of the appropriate address. Provide the full postal address of each affiliation, including the country name and, if available, the e-mail address of each author.

• Corresponding author. Clearly indicate who will handle correspondence at all stages of refereeing and publication, also post-publication. Ensure that the e-mail address is given and that contact details are kept up to date by the corresponding author.

C)      Abstract

A nonmathematical abstract, not exceeding 200 words, is required for all papers. The abstract should state briefly the purpose of the research, the principal results and major conclusions.

D)     Keywords

The author should provide a list of three to six key words that clearly describe the subject matter of the paper. These keywords will be used for indexing purposes.

E)      Introduction

State the objectives of the work and provide an adequate background, avoiding a detailed literature survey or a summary of the results.

F)      Material and methods

Provide sufficient detail to allow the work to be reproduced. Methods already published should be indicated by a reference: only relevant modifications should be described.

G)     Results and Discussion

Results should be clear and concise. Discussion should explore the significance of the results of the work, not repeat them. A combined Results and Discussion section is often appropriate. Avoid extensive citations and discussion of published literature.

H)     Conclusions

The main conclusions of the study may be presented in a short Conclusions section, which may stand alone or form a subsection of a Discussion or Results and Discussion section.

I)        Figures and Tables

All figures and tables must be incorporated into the text (in Portrait orientation). Figures (diagrams and photographs) should be numbered consecutively using Arabic numbers. They should be placed in the text soon after the point where they are referenced. Figures should be centered in a column and should have a figure caption placed underneath. Captions should be centered in the column, in the format “Figure 1” and are in upper and lower case letters. When referring to a figure in the body of the text, the abbreviation "Figure" is used Illustrations must be submitted in digital format, with a good resolution. Table captions appear centered above the table in upper and lower case letters. When referring to a table in the text, "Table" with the proper number is used. Captions should be centered in the column, in the format “Table 1” and are in upper and lower case letters. Tables are numbered consecutively and independently of any figures. All figures and tables must be incorporated into the text (in Portrait orientation).

J)       Equations and Mathematical Expressions

Equation numbers should appear in parentheses and be numbered consecutively. All equation numbers must appear on the right-hand side of the equation and should be referred to within the text. Two different types of styles can be used for equations and mathematical expressions.

K)      Nomenclature and units

Follow internationally accepted rules and conventions: use the international system of units (SI). If other quantities are mentioned, give their equivalent in SI. You are urged to consult IUGS: Nomenclature for geological time scales/rock names: for further information.

L)       Footnotes

Footnotes should be used sparingly. Number them consecutively throughout the article. Many word processors build footnotes into the text, and this feature may be used. Should this not be the case, indicate the position of footnotes in the text and present the footnotes themselves separately at the end of the article.

M)   Acknowledgements

A brief acknowledgment of not more than 50 words should be included at the end of the manuscripts, before the list of references.

N)     References

References should appear in a separate Reference section at the end of the manuscripts, typed single-spaced in the order of item referred to in the next, using numerals in square brackets. Style for papers: [Reference number], Authors (last name, followed by first initial for all author), year, title, periodical, volume (issue), inclusive page numbers. Style for books: [Reference number], Authors, title (in italics), year, location, publisher, chapter or page numbers. All references should be written in English such as the following:

Journal Paper:

[1] Khalid, M., Omatu, S. and Yusof, R. 1995. Temperature Regulation with Neural Networks and Alternative Control Schemes. IEEE Trans on Neural Networks. 6(3): 572-582.


[2] Khalid, M., Omatu, S. and  Yusof, R. 1995. Neuro-Control and Its Applications. Springer.

Conference Proceeding:

[3] Horiba, Y., Kobayashi, S., Akita, H. and Usami, H. 2013. Friction properties of MoS2 penetrated aluminum alloy. Proceedings of JAST Tribology Conference. Tokyo, Japan.


[4] Hashemzadeh, M., 2014. Investigation into fibre laser cutting. The University of Nottingham. Ph.D. Thesis.

It is recommend to use the MPMPJ style (Endnote)-Download Here

You can find the Journal Template here



Creative Commons License
Journal of Modern Processes in Manufacturing and Production is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Under the license, authors retain ownership of the copyright for their content, but allow anyone to download, reuse, reprint, modify, distribute, and/or copy the content as long as the original authors and source are cited properly.