Author Index

A

  • Afsari, Ahmad Production of Dispersed Ceramic Nano-Particles in Al Alloy Using Friction Stir Processing [Volume 5, Issue 3, 2016, Pages 41-57]
  • Ahadzadeh Namin, Mahnaz Performance Evaluation of Banking Organizations Using the New Proposed Integrated DEA-BSC Model [Volume 5, Issue 4, 2016, Pages 71-88]
  • Alam Tabriz, Akbar Performance Evaluation of Banking Organizations Using the New Proposed Integrated DEA-BSC Model [Volume 5, Issue 4, 2016, Pages 71-88]
  • Alinaghian, Iman Numerical and Experimental Investigation of Thickness Variation in the Spinning Process of Al-1060 Alloy [Volume 5, Issue 4, 2016, Pages 5-12]
  • Alinezhad, Alireza Ranking 7Ms Effective Factors in Iranian Production Systems Using Fuzzy AHP [Volume 5, Issue 3, 2016, Pages 69-82]
  • Amini, Amir Ranking 7Ms Effective Factors in Iranian Production Systems Using Fuzzy AHP [Volume 5, Issue 3, 2016, Pages 69-82]
  • Amini, Kamran Investigating the Effect of Titanium Addition on the Microstructure and Mechanical Properties of Ni-Hard 4 Cast Iron [Volume 5, Issue 1, 2016, Pages 17-27]
  • Amini, Saeid Development of a New Dynamic Friction Model for Analytical Modeling of Elliptical Vibration Assisted Turning Process [Volume 5, Issue 3, 2016, Pages 83-92]

B

  • Bahrami Alamdarlo, Masoud Investigating the Effect of Titanium Addition on the Microstructure and Mechanical Properties of Ni-Hard 4 Cast Iron [Volume 5, Issue 1, 2016, Pages 17-27]
  • Bakhtiarizade, Hamed Experimental Investigation and Analysis of Manufacturing Wind Turbine Blades Produced by Hydroforming of Aluminum Alloy AA5754 [Volume 5, Issue 2, 2016, Pages 69-79]
  • Barahimi, Vahid Experimental Investigation of the Surface Roughness in Grinding of BK7 Optical Glass in Brittle Mode [Volume 5, Issue 2, 2016, Pages 33-41]
  • Behbahani, Saeed Development of a New Dynamic Friction Model for Analytical Modeling of Elliptical Vibration Assisted Turning Process [Volume 5, Issue 3, 2016, Pages 83-92]

F

  • Farahnakian, Masoud Experimental Investigation of the Surface Roughness in Grinding of BK7 Optical Glass in Brittle Mode [Volume 5, Issue 2, 2016, Pages 33-41]
  • Farahnakian, Masoud Machining Operation Parameters in Drilling Process; Variation of Thrust Forces in Epoxy Based Nanocomposites [Volume 5, Issue 3, 2016, Pages 5-11]
  • Farahnakian, Masoud Dry Friction and Wear Performance of Micro Surface Textures Generated by Ultrasonic Assisted Face Turning [Volume 5, Issue 4, 2016, Pages 21-33]
  • Farhadipour, Pedram Investigation of the Microscopic Aspect of the Stress Distribution in the Accumulative Roll Bonding Process Using the Slab Method [Volume 5, Issue 4, 2016, Pages 35-44]
  • Foroojani Zadeh, Kamyar Experimental Passive Suppression of the Regenerative Chatter Phenomenon by Variation of the Frequency and Amplitude of the Spindle Motor Excitation in Turning [Volume 5, Issue 4, 2016, Pages 13-19]

G

  • Ghazi Mir Saeed, Akbar Experimental Investigation and Numerical Simulation of the Mechanical Behavior of a Novel Honeycomb Core Sandwich Panels Formed by Hydroforming Process [Volume 5, Issue 3, 2016, Pages 23-39]
  • Ghoreishi, Majid Numerical and Experimental Study of Geometrical Dimensions on Laser-TIG Hybrid Welding of Stainless Steel 1.4418 [Volume 5, Issue 2, 2016, Pages 21-31]
  • Golabi, Sa’id Numerical and Analytical Investigation of a Cylinder Made of Functional Graded Materials under Thermo-Mechanical Fields [Volume 5, Issue 3, 2016, Pages 59-68]
  • Goodarzi, Mohammad Robust Fractional Order Control of Under-actuated Electromechanical System [Volume 5, Issue 1, 2016, Pages 69-86]
  • Goodarzi, Mohammad Fractional Order Control of Micro Electro-Mechanical Systems [Volume 5, Issue 2, 2016, Pages 55-67]

H

  • Hashemi, Ramin Evaluation of Damage Problems in the Water Pump Components of an Air Compressor Cooling System: a Case Study [Volume 5, Issue 3, 2016, Pages 13-21]
  • Hesampour, Abolfazl A Method for Ranking, Assessment and Evaluation of Sustainability Factors in Project [Volume 5, Issue 1, 2016, Pages 29-44]
  • Heydari Vini, Mohammad Investigation of the Microscopic Aspect of the Stress Distribution in the Accumulative Roll Bonding Process Using the Slab Method [Volume 5, Issue 4, 2016, Pages 35-44]
  • Hojaji, Mohammad The Analysis of Experimental Process of Production, Stabilizing and Measurement of the Thermal Conductivity Coefficient of Water/Graphene Oxide as a Cooling Nanofluid in Machining [Volume 5, Issue 2, 2016, Pages 43-53]
  • Honarpisheh, Mohammad Numerical and Experimental Investigation of Thickness Variation in the Spinning Process of Al-1060 Alloy [Volume 5, Issue 4, 2016, Pages 5-12]
  • Hosseinzadeh Lotfi, Farhad Performance Evaluation of Banking Organizations Using the New Proposed Integrated DEA-BSC Model [Volume 5, Issue 4, 2016, Pages 71-88]

J

  • Jafarian Jam, Nathan Experimental Study of Packing Time and Melt Temperature Effects on Shrinkage of a Thin Sheet Made of Wood-HDPE Composite [Volume 5, Issue 1, 2016, Pages 5-15]
  • Jafari Fesharaki, Javad Numerical and Analytical Investigation of a Cylinder Made of Functional Graded Materials under Thermo-Mechanical Fields [Volume 5, Issue 3, 2016, Pages 59-68]

K

  • Kafaei Kavoshian, Nazanin Experimental Investigation and Numerical Simulation of the Mechanical Behavior of a Novel Honeycomb Core Sandwich Panels Formed by Hydroforming Process [Volume 5, Issue 3, 2016, Pages 23-39]
  • Karamian, Ebrahim Survey of AZ31/HA-Zeolite Nano Crystalline Biocomposite with Powder Metallurgy (PM) [Volume 5, Issue 2, 2016, Pages 5-11]
  • Karami Pirmohammadi, Bahman Simulation and Analysis of the New Brake System according to Changing of the Spring and Vertical Acceleration of the Wheels [Volume 5, Issue 4, 2016, Pages 57-70]
  • Karimian, Majid Survey of AZ31/HA-Zeolite Nano Crystalline Biocomposite with Powder Metallurgy (PM) [Volume 5, Issue 2, 2016, Pages 5-11]
  • Kazerooni, Afshin Experimental Investigation and Numerical Simulation of the Mechanical Behavior of a Novel Honeycomb Core Sandwich Panels Formed by Hydroforming Process [Volume 5, Issue 3, 2016, Pages 23-39]
  • Khodsetan, Mohsen Numerical and Experimental Study of Residual Stress Measurement and Thickness Distribution of T-shape Steel Tube Produced by Tube Hydroforming [Volume 5, Issue 1, 2016, Pages 87-99]
  • Khosrojerdi, Mohammad Reza Development of a New Dynamic Friction Model for Analytical Modeling of Elliptical Vibration Assisted Turning Process [Volume 5, Issue 3, 2016, Pages 83-92]
  • Kianfar, Kianoosh Performance Evaluation of Banking Organizations Using the New Proposed Integrated DEA-BSC Model [Volume 5, Issue 4, 2016, Pages 71-88]

L

  • Loh-Mousavi, Mohsen Numerical Analysis of the Effect of Sinusoidal Pressure Path on Thinning of Tube in Hot Metal Free Bulging Process [Volume 5, Issue 1, 2016, Pages 45-51]

M

  • Madani, Seyed Ghasem Numerical and Analytical Investigation of a Cylinder Made of Functional Graded Materials under Thermo-Mechanical Fields [Volume 5, Issue 3, 2016, Pages 59-68]
  • Meghdadi, Amir Homayoon The Analysis of Experimental Process of Production, Stabilizing and Measurement of the Thermal Conductivity Coefficient of Water/Graphene Oxide as a Cooling Nanofluid in Machining [Volume 5, Issue 2, 2016, Pages 43-53]
  • Moghadasi, Hesam Evaluation of Damage Problems in the Water Pump Components of an Air Compressor Cooling System: a Case Study [Volume 5, Issue 3, 2016, Pages 13-21]
  • Moghri, Mehdi Machining Operation Parameters in Drilling Process; Variation of Thrust Forces in Epoxy Based Nanocomposites [Volume 5, Issue 3, 2016, Pages 5-11]
  • Mohammadnezhad, Mahyar Investigating the Effect of Titanium Addition on the Microstructure and Mechanical Properties of Ni-Hard 4 Cast Iron [Volume 5, Issue 1, 2016, Pages 17-27]
  • Mohemi, Enayatolah Evaluation of Damage Problems in the Water Pump Components of an Air Compressor Cooling System: a Case Study [Volume 5, Issue 3, 2016, Pages 13-21]
  • Moradi, Mahmoud Numerical and Experimental Study of Geometrical Dimensions on Laser-TIG Hybrid Welding of Stainless Steel 1.4418 [Volume 5, Issue 2, 2016, Pages 21-31]
  • Mosavi, Sayed Ali Experimental Investigation of the Effect of Deionized Water on Surface Roughness of Near Dry Electro Discharge Machining of AISI D2 Steel [Volume 5, Issue 2, 2016, Pages 13-20]

N

  • Najafi, Esmaeil Performance Evaluation of Banking Organizations Using the New Proposed Integrated DEA-BSC Model [Volume 5, Issue 4, 2016, Pages 71-88]
  • Namazikhah, Shayan Numerical and Experimental Investigation of Thickness Variation in the Spinning Process of Al-1060 Alloy [Volume 5, Issue 4, 2016, Pages 5-12]
  • Nemati Najafabadi, Vahid Investigating the Effect of Titanium Addition on the Microstructure and Mechanical Properties of Ni-Hard 4 Cast Iron [Volume 5, Issue 1, 2016, Pages 17-27]
  • Nikbakht, Mehrdad A Method for Ranking, Assessment and Evaluation of Sustainability Factors in Project [Volume 5, Issue 1, 2016, Pages 29-44]
  • Nikbakht, Merdad Identification and Ranking Green Supplier Selection Criteria Using One-Sample T-Test and FANP Methods: A Case Study for Petrochemical Industry [Volume 5, Issue 1, 2016, Pages 53-67]
  • Nosouhi, Reza Development of a New Dynamic Friction Model for Analytical Modeling of Elliptical Vibration Assisted Turning Process [Volume 5, Issue 3, 2016, Pages 83-92]
  • Nosouhi, Reza Experimental Passive Suppression of the Regenerative Chatter Phenomenon by Variation of the Frequency and Amplitude of the Spindle Motor Excitation in Turning [Volume 5, Issue 4, 2016, Pages 13-19]
  • Nouri Hosseinabadi, Hossein Dry Friction and Wear Performance of Micro Surface Textures Generated by Ultrasonic Assisted Face Turning [Volume 5, Issue 4, 2016, Pages 21-33]

P

  • Payganeh, Gholamhasan Numerical and Experimental Study of Residual Stress Measurement and Thickness Distribution of T-shape Steel Tube Produced by Tube Hydroforming [Volume 5, Issue 1, 2016, Pages 87-99]

R

  • Rabiezadeh, Amin Production of Dispersed Ceramic Nano-Particles in Al Alloy Using Friction Stir Processing [Volume 5, Issue 3, 2016, Pages 41-57]
  • Rahmani, Azam Numerical and Experimental Study of Geometrical Dimensions on Laser-TIG Hybrid Welding of Stainless Steel 1.4418 [Volume 5, Issue 2, 2016, Pages 21-31]
  • Rahmatabadi, Davood Evaluation of Damage Problems in the Water Pump Components of an Air Compressor Cooling System: a Case Study [Volume 5, Issue 3, 2016, Pages 13-21]
  • Ranjbarzadeh, Ramin The Analysis of Experimental Process of Production, Stabilizing and Measurement of the Thermal Conductivity Coefficient of Water/Graphene Oxide as a Cooling Nanofluid in Machining [Volume 5, Issue 2, 2016, Pages 43-53]

S

  • Sayfi, Pirouz Identification and Ranking Green Supplier Selection Criteria Using One-Sample T-Test and FANP Methods: A Case Study for Petrochemical Industry [Volume 5, Issue 1, 2016, Pages 53-67]
  • Shahbazi karami, Javad Experimental Investigation and Numerical Simulation of the Mechanical Behavior of a Novel Honeycomb Core Sandwich Panels Formed by Hydroforming Process [Volume 5, Issue 3, 2016, Pages 23-39]
  • Shahbazi Karami, Javad Numerical and Experimental Study of Residual Stress Measurement and Thickness Distribution of T-shape Steel Tube Produced by Tube Hydroforming [Volume 5, Issue 1, 2016, Pages 87-99]
  • Shahbazi Karami, Javad Experimental Investigation and Analysis of Manufacturing Wind Turbine Blades Produced by Hydroforming of Aluminum Alloy AA5754 [Volume 5, Issue 2, 2016, Pages 69-79]
  • Shahmoradi, Mohsen Experimental Investigation and Analysis of Manufacturing Wind Turbine Blades Produced by Hydroforming of Aluminum Alloy AA5754 [Volume 5, Issue 2, 2016, Pages 69-79]
  • Shahrajabian, Hamzeh Machining Operation Parameters in Drilling Process; Variation of Thrust Forces in Epoxy Based Nanocomposites [Volume 5, Issue 3, 2016, Pages 5-11]
  • Shirouyehzad, Hadi A Method for Ranking, Assessment and Evaluation of Sustainability Factors in Project [Volume 5, Issue 1, 2016, Pages 29-44]
  • Sobhani, Siavash Experimental Study of Packing Time and Melt Temperature Effects on Shrinkage of a Thin Sheet Made of Wood-HDPE Composite [Volume 5, Issue 1, 2016, Pages 5-15]
  • Soltani, Mehrdad Survey of AZ31/HA-Zeolite Nano Crystalline Biocomposite with Powder Metallurgy (PM) [Volume 5, Issue 2, 2016, Pages 5-11]

T

  • Taghizadeh, Mojtaba Experimental Investigation of the Effect of Deionized Water on Surface Roughness of Near Dry Electro Discharge Machining of AISI D2 Steel [Volume 5, Issue 2, 2016, Pages 13-20]
  • Tajdari, Mehdi Simulation and Analysis of the New Brake System according to Changing of the Spring and Vertical Acceleration of the Wheels [Volume 5, Issue 4, 2016, Pages 57-70]
  • Talebi Anaraki, Ali Numerical Analysis of the Effect of Sinusoidal Pressure Path on Thinning of Tube in Hot Metal Free Bulging Process [Volume 5, Issue 1, 2016, Pages 45-51]
  • Tayebi, Moslem Evaluation of Damage Problems in the Water Pump Components of an Air Compressor Cooling System: a Case Study [Volume 5, Issue 3, 2016, Pages 13-21]

Z

  • Zarepour, Hamid An Experimental Investigation on Surface Roughness and Edge Chipping in Micro Ultrasonic Machining [Volume 5, Issue 4, 2016, Pages 45-56]