Author Index

A

  • Abbasi, Alireza Identification and Clustering Outsourcing Risks of Aviation Part- Manufacturing Projects in Aviation Industries Organization Using Kmeans Method [Volume 7, Issue 4, 2018, Pages 17-30]
  • Abdollahian, Heidar Three Dimensional Model Reconstruction of a Cuboid Based on Stereo Vision [Volume 8, Issue 4, 2019, Pages 25-35]
  • Abedi, Ali Optimization of parameters of Anti lock Braking System for use in deep drawing [Volume 2, Issue 1, 2013, Pages 19-28]
  • Abedpour, Sina Predicting the Influence of Electrical Discharge Machining (EDM) Parameters on the Finished Work Surface in CK45 Steel [Volume 9, Issue 1, 2020, Pages 63-78]
  • Abnavi, Hojatollah An Electrochemical Investigation on the Effect of Heat-Stable Salts on the Corrosion Resistance of Carbon Steel in MDEA Solution [Volume 10, Issue 3, 2021, Pages 5-18]
  • Adiban, Reza Development of Linguistic Rules Diagnosis of Failure in Centrifugal Pump for Use in Expert System [Volume 4, Issue 2, 2015, Pages 67-82]
  • Adnani Salehi, Seyed Adnan A Novel Optimization Approach Applied to Multi-Pass Turning Process [Volume 6, Issue 2, 2017, Pages 5-19]
  • Adnani Salehi, Seyed Adnan Optimization of Cutting Parameters Based on Production Time Using Colonial Competitive (CC) and Genetic (G) Algorithms [Volume 6, Issue 4, 2017, Pages 47-58]
  • Adressi, Abolfazl Solving Group Scheduling Problem in No-wait Flow Shop with Sequence Dependent Setup Times [Volume 3, Issue 1, 2014, Pages 5-16]
  • Adressi, Abolfazl Solving the Problem of Scheduling Unrelated Parallel Machines with Limited Access to Jobs [Volume 3, Issue 2, 2014, Pages 5-16]
  • Adressi, Abolfazl Scheduling Problem of Virtual Cellular Manufacturing Systems (VCMS); Using Simulated Annealing and Genetic Algorithm based Heuristics [Volume 3, Issue 4, 2014, Pages 45-60]
  • Afra, Negar Performing a Calcium-Phosphate Layer on Porous NiTi Alloy for Using in Orthopedic Applications [Volume 2, Issue 4, 2013, Pages 45-50]
  • Afsari, Ahmad Production of Dispersed Ceramic Nano-Particles in Al Alloy Using Friction Stir Processing [Volume 5, Issue 3, 2016, Pages 41-57]
  • Afsari, Ahmad Effect of Coating Process Parameters on Corrosion Behavior of Ti-6Al-4V [Volume 9, Issue 1, 2020, Pages 33-42]
  • Afsari, Ahmad Imperialist Competitive Algorithm (ICA) Approach for Optimization of the Surface Grinding Process [Volume 9, Issue 1, 2020, Pages 51-62]
  • Afsari, Ahmad Predicting the Influence of Electrical Discharge Machining (EDM) Parameters on the Finished Work Surface in CK45 Steel [Volume 9, Issue 1, 2020, Pages 63-78]
  • Afsari, Ahmad Investigation of Parameters Affecting Surface Integrity and Material Removal during Electrical Discharge Machining of HARDOX-400 Steel [Volume 9, Issue 2, 2020, Pages 73-84]
  • Afsari, Ahmad Study the Percentage of Carbon and Ferrite in Layers of Steel (SA-516) by Strip Cladding with E316L [Volume 9, Issue 3, 2020, Pages 41-50]
  • Afsari, Ahmad A New Geometry Modification Algorithm for Blank Shape Optimization in the Deep Drawing Process [Volume 9, Issue 4, 2020, Pages 15-25]
  • Afsari, Ahmad Numerical Study of Effective Parameters in the Deep Drawing Process of a Cylindrical Cup and Comparison with Experimental Results [Volume 9, Issue 2, 2020, Pages 31-42]
  • Afsari, Ahmad Evaluation of Optimal Conditions, Microstructure, and Mechanical Properties of Aluminum to Copper Joints Welded by FSW [Volume 9, Issue 4, 2020, Pages 61-81]
  • Afsari, Ahmad Study of Mechanical Properties of 7075 Aluminum Alloy Due to Particle Size Reduction due to Constrained Groove Pressing CGP Process [Volume 10, Issue 1, 2021, Pages 5-18]
  • Afsari, Ahmad An Investigation of Using RCS-processed Intramedullary Stainless Steel 316L Nail in the Treatment of Diaphyseal Bone Fractures [Volume 10, Issue 3, 2021, Pages 59-75]
  • Afsari, Ahmad Mechanical Stability of RCSed and ECAPed Intramedullary 316L Stainless Steel Nails in the Treatment of Diaphyseal Bone Fractures [Volume 10, Issue 4, 2021, Pages 37-49]
  • Aghajani Derazkola, Hamed Simulation of Tool Rotation and Travelling Speed Effects on Friction Stir Welding of Ti-6Al-4V [Volume 8, Issue 2, 2019, Pages 39-56]
  • Aghajani Derazkola, Hamed Effects of Tool Tilt Angle and Plunge Depth on Properties of Polycarbonate FSW Joint [Volume 7, Issue 4, 2018, Pages 41-55]
  • Aghili, Mohammad Reza Experimental Investigation of Thermal Conductivity of Aluminum Alloy 3003 Produced by Equal Channel Angular Rolling Process [Volume 4, Issue 4, 2015, Pages 29-38]
  • Ahadzadeh Namin, Mahnaz Performance Evaluation of Banking Organizations Using the New Proposed Integrated DEA-BSC Model [Volume 8, Issue 1, 2019, Pages 73-90]
  • Ahmadi, Farshid Comparison of Hardness Values of Various specimens with different geometries and material properties after ECAP [Volume 3, Issue 3, 2014, Pages 61-78]
  • Ahmadi, Farshid Evolution of Texture and Grain Size during Equal Channel Angular Extrusion of Pure Copper and 6012 Aluminum [Volume 4, Issue 4, 2015, Pages 47-58]
  • Ahmadi, Farshid The Effect of ECAP Die Helix Angle on the Microstructure Homogeneity of the Processed Samples by FEM Method [Volume 10, Issue 2, 2021, Pages 27-39]
  • Ahmadi, Iman Design and Construction of Load Cell of a Three Point Hitch Dynamometer for Tractor John Deere 3140 [Volume 3, Issue 2, 2014, Pages 47-58]
  • Ahmadi, Moslem Design and Manufacturing of Jet to free Stream Simulator to Experimental Study of Interaction of Oblique Jet in Crossflow [Volume 4, Issue 1, 2015, Pages 65-81]
  • Akbari, Ali Experimental Study of Effective Parameters on Honing Process of Cast Iron Cylinder [Volume 4, Issue 3, 2015, Pages 5-12]
  • Akbari, Javad Numerical Simulation of Homogeneous, Two and Three Lattice Layers Scaffolds with Constant Density [Volume 9, Issue 2, 2020, Pages 5-22]
  • Akbari, Mostafa Improving the Hardness and Microstructural Properties of Piston Alloy Using the FSP Method [Volume 10, Issue 2, 2021, Pages 53-62]
  • Alam Tabriz, Akbar Performance Evaluation of Banking Organizations Using the New Proposed Integrated DEA-BSC Model [Volume 8, Issue 1, 2019, Pages 73-90]
  • Ali Fatemi, Sayed Experimental Investigation of Effective Parameters at Laser Sintering the Mixture of Iron and Copper Powder [Volume 2, Issue 2, 2013, Pages 3-14]
  • Alimardan, Hossein Effect of Temperature on Diffusion-Bonded Joint of AZ31 Magnesium and 7075 Aluminum Alloy [Volume 2, Issue 3, 2013, Pages 3-10]
  • Alinaghian, Iman Numerical and Experimental Investigation of Thickness Variation in the Spinning Process of Al-1060 Alloy [Volume 5, Issue 4, 2016, Pages 5-12]
  • Alinezhad, Alireza A Two-phase Model for Product Design Development and Evaluation and Supplier Selection in Product Configuration Change Process (Case study: SUPCO) [Volume 3, Issue 3, 2014, Pages 17-40]
  • Alinezhad, Alireza Ranking and Managing Stock in the Stock Market Using Fundamental and Technical Analyses [Volume 4, Issue 3, 2015, Pages 45-57]
  • Alinezhad, Alireza Ranking 7Ms Effective Factors in Iranian Production Systems Using Fuzzy AHP [Volume 8, Issue 1, 2019, Pages 59-72]
  • Amindoust, Atefeh Ranking of the Solutions of Reducing Electrical Energy Consumption in Isfahan Sepahan Cement Industry by Using Fuzzy TOPSIS Method [Volume 8, Issue 2, 2019, Pages 19-28]
  • Amindoust, Atefeh Ranking of Outsourcing Risks in Supply Chain of Automotive Industry Using Fuzzy AHP and Fuzzy Inference System [Volume 8, Issue 1, 2019, Pages 5-18]
  • Amindoust, Atefeh Improving the Performance of Forecasting Models with Classical Statistical and Intelligent Models in Industrial Productions [Volume 10, Issue 2, 2021, Pages 13-26]
  • Amini, Ahmad Formability Study of Steel Tailor laser Welded Blanks (TWB) in Stretch Forming [Volume 2, Issue 1, 2013, Pages 15-18]
  • Amini, Amir Ranking and Managing Stock in the Stock Market Using Fundamental and Technical Analyses [Volume 4, Issue 3, 2015, Pages 45-57]
  • Amini, Amir Ranking 7Ms Effective Factors in Iranian Production Systems Using Fuzzy AHP [Volume 8, Issue 1, 2019, Pages 59-72]
  • Amini, Kamran Investigating the Effect of Titanium Addition on the Microstructure and Mechanical Properties of Ni-Hard 4 Cast Iron [Volume 5, Issue 1, 2016, Pages 17-27]
  • Amini, Mousa A Two-phase Model for Product Design Development and Evaluation and Supplier Selection in Product Configuration Change Process (Case study: SUPCO) [Volume 3, Issue 3, 2014, Pages 17-40]
  • Amini, Saeid Development of a New Dynamic Friction Model for Analytical Modeling of Elliptical Vibration Assisted Turning Process [Volume 5, Issue 3, 2016, Pages 69-78]
  • Amini, Saeid Finite Element Analysis and Experimental Investigation on the Conventional and Vibration Assisted Drilling [Volume 6, Issue 4, 2017, Pages 23-33]
  • Amini, Saeid The Effectiveness of Ceramic Wiper Tool in Turning of Monel K500 [Volume 7, Issue 2, 2018, Pages 47-64]
  • Arabbeigi, Mehdi Analytical, Experimental and Finite Element Investigation of Internal Pressure Effect in Hydroforming Process on Metallic Bellows Produced from Thin Wall Tube of Austenitic Stainless Steel Grade 316L [Volume 2, Issue 1, 2013, Pages 9-14]
  • Ari-Gur, Pnina An Investigation on Formability and Crystallographic Texture in Novel Magnesium Alloys [Volume 10, Issue 3, 2021, Pages 19-24]
  • Armanian, Amin The Optimization of the Effective Parameters of the Die in Parallel Tubular Channel Angular Pressing Process by Using Neural Network and Genetic Algorithm Methods [Volume 6, Issue 2, 2017, Pages 21-35]
  • Aryana, Maryam Fabrication of Porous Segments Using Ti-6Al-4V Chips for Orthopaedic Applications [Volume 4, Issue 4, 2015, Pages 59-65]
  • Asadbeiki, Mohammad Experimental Investigation of the Effects of the Roller Burnishing Parameters on the Surface Roughness and Micro-hardness of Ti6Al4V Alloy [Volume 8, Issue 3, 2019, Pages 57-66]
  • Asadi, Mehrdad Implementation of Agile Manufacturing Principles in Small and Medium Enterprises (SMES) [Volume 4, Issue 3, 2015, Pages 31-44]
  • Asadi, Parviz Improving the Hardness and Microstructural Properties of Piston Alloy Using the FSP Method [Volume 10, Issue 2, 2021, Pages 53-62]
  • Asadi Asad Abad, Mohammad Reza Three Dimensional Model Reconstruction of a Cuboid Based on Stereo Vision [Volume 8, Issue 4, 2019, Pages 25-35]
  • Asiaban, Naser Assessment of Third‌-order Shear Deformation Graphene Nanoplate Response under Static Loading Using Modified Couple Stress Theory [Volume 11, Issue 1, 2022, Pages 41-57]
  • Azad, Saeid System Engineering Implementation Process for Super-Systems [Volume 7, Issue 1, 2018, Pages 67-78]
  • Azam bin Mohd Dali, Mohd Nor Fabrication of Various Dimple Shapes and Arrays on a Hypereutectic Al-Si Alloy Using a Turning Process [Volume 11, Issue 1, 2022, Pages 75-81]
  • Azimi, Masoud An Optimization on the DIN1.2080 Alloy in the Electrical Discharge Machining Process Using ANN and GA [Volume 6, Issue 1, 2017, Pages 33-47]
  • Azizi, Abdolhamid Investigation of Mechanical Properties for Commercial Purity Titanium Severely Plastic Deformed by Accumulative Roll-bonding Process [Volume 6, Issue 2, 2017, Pages 37-49]
  • Azizi, Abdolhamid Comparison of ZAMAK 2 and ZAMAK 3 Alloys Produced by Powder Metallurgy Process [Volume 10, Issue 3, 2021, Pages 45-58]
  • Azizi, Vahid Solving Group Scheduling Problem in No-wait Flow Shop with Sequence Dependent Setup Times [Volume 3, Issue 1, 2014, Pages 5-16]
  • Azizifar, Shahram Modeling and Optimization of Industrial Multi-Stage Compressed Air System Using Actual Variable Effectiveness in Hot Regions [Volume 4, Issue 2, 2015, Pages 29-46]

B

  • Baghbani, Mohammad Extracting Manufacturing Process Map in the Form of the IDEF Model Prerequisite for the Implementation of PFMEA in the Sugar Industry [Volume 7, Issue 2, 2018, Pages 79-93]
  • Baghbani, Mohammad IDEF0 Modeling Standard: A Tool for Process Map Drawing under Requirements of ISO 9001: 2015: A Case Study [Volume 8, Issue 4, 2019, Pages 57-66]
  • Bagherzadeh Khajeh, Majid Extracting Manufacturing Process Map in the Form of the IDEF Model Prerequisite for the Implementation of PFMEA in the Sugar Industry [Volume 7, Issue 2, 2018, Pages 79-93]
  • Bahmankhah, Behnam Scheduling Problem of Virtual Cellular Manufacturing Systems (VCMS); Using Simulated Annealing and Genetic Algorithm based Heuristics [Volume 3, Issue 4, 2014, Pages 45-60]
  • Bahrami, Maryam Improving the Performance of Forecasting Models with Classical Statistical and Intelligent Models in Industrial Productions [Volume 10, Issue 2, 2021, Pages 13-26]
  • Bahrami, Pooya Investigation of Mechanical Properties for Commercial Purity Titanium Severely Plastic Deformed by Accumulative Roll-bonding Process [Volume 6, Issue 2, 2017, Pages 37-49]
  • Bahrami, Pooya Comparison of ZAMAK 2 and ZAMAK 3 Alloys Produced by Powder Metallurgy Process [Volume 10, Issue 3, 2021, Pages 45-58]
  • Bahrami Alamdarlo, Masoud Investigating the Effect of Titanium Addition on the Microstructure and Mechanical Properties of Ni-Hard 4 Cast Iron [Volume 5, Issue 1, 2016, Pages 17-27]
  • Bakhtiarizade, Hamed Experimental Investigation and Analysis of Manufacturing Wind Turbine Blades Produced by Hydroforming of Aluminum Alloy AA5754 [Volume 5, Issue 2, 2016, Pages 69-79]
  • Bakhtiary Dastgerdi, Nafiseh Designing an Improved Stochastic Planning Model for Supply Chain Considering Maintenance and Operations (MRO) in Rahiab Sanat Sepahan Engineering Technical Company [Volume 9, Issue 3, 2020, Pages 51-63]
  • Banooni, Salem Modeling and Optimization of Industrial Multi-Stage Compressed Air System Using Actual Variable Effectiveness in Hot Regions [Volume 4, Issue 2, 2015, Pages 29-46]
  • Barahimi, Vahid Experimental Investigation of the Surface Roughness in Grinding of BK7 Optical Glass in Brittle Mode [Volume 5, Issue 2, 2016, Pages 33-41]
  • Barahimi, Vahid Experimental Investigation of Subsurface Damages Made by Cup Grinding and Lapping Process of Optical Glass BK7 in Ductile Mode [Volume 6, Issue 1, 2017, Pages 15-24]
  • Barati, Mohammad Survey and Effects of Manufacture and Assembly Errors on the Output Error of Globoidal Cam Mechanisms [Volume 4, Issue 4, 2015, Pages 5-14]
  • Barootiha, Ali Free Vibration Analysis of Sandwich Beams with FG Face Sheets Based on the High Order Sandwich Beam Theory [Volume 9, Issue 2, 2020, Pages 57-71]
  • Bashirzadeh, Reza Solving Group Scheduling Problem in No-wait Flow Shop with Sequence Dependent Setup Times [Volume 3, Issue 1, 2014, Pages 5-16]
  • Bashirzadeh, Reza Scheduling Problem of Virtual Cellular Manufacturing Systems (VCMS); Using Simulated Annealing and Genetic Algorithm based Heuristics [Volume 3, Issue 4, 2014, Pages 45-60]
  • Basiri Paknafs, Zahra The Milling of Metalsthrough Adaptive Neuro-FuzzyInference System (ANFIS) for non-touch Measuring of the Temperature to Reduce Coolant [Volume 9, Issue 2, 2020, Pages 23-30]
  • Behagh, Amir Masoud A Study of Abrasive Media Effect on Deburring in Barrel Finishing Process [Volume 8, Issue 3, 2019, Pages 27-39]
  • Behagh, Omid A Study of Abrasive Media Effect on Deburring in Barrel Finishing Process [Volume 8, Issue 3, 2019, Pages 27-39]
  • Behbahani, Saeed Development of a New Dynamic Friction Model for Analytical Modeling of Elliptical Vibration Assisted Turning Process [Volume 5, Issue 3, 2016, Pages 69-78]
  • Beigi, Mohsen Design and Construction of Load Cell of a Three Point Hitch Dynamometer for Tractor John Deere 3140 [Volume 3, Issue 2, 2014, Pages 47-58]
  • Berjis, Negin Evaluating Organizational Performance Based on Safety Management Using Data Envelopment Analysis; Case Study: Isfahan Car Industry [Volume 2, Issue 3, 2013, Pages 19-30]
  • Biniyazan, Farid An Investigation on the Microstructure and Impression Creep Behavior of the Magnesium Alloys [Volume 9, Issue 1, 2020, Pages 43-49]
  • Bisadi, Hossein Formability Study of Steel Tailor laser Welded Blanks (TWB) in Stretch Forming [Volume 2, Issue 1, 2013, Pages 15-18]

C

  • Choopani, Yahya Investigation of the Effective Parameters on Surface Roughness in Magnetic Abrasive Finishing Process Using Design of Experiments [Volume 3, Issue 1, 2014, Pages 17-25]
  • Choopani, Yahya Micro Machining of AISI 440C Stainless Steel using Magnetic Field and Magnetic Abrasive Particles [Volume 3, Issue 2, 2014, Pages 17-26]

D

  • Darvishi, Meysam Using Rubber Pad Forming Process for Local Compression in Assembling of Vehicle Structure Tubes [Volume 2, Issue 2, 2013, Pages 15-22]
  • Davar, Ali Assessment of Third‌-order Shear Deformation Graphene Nanoplate Response under Static Loading Using Modified Couple Stress Theory [Volume 11, Issue 1, 2022, Pages 41-57]
  • Davoodi, Behnam Study of Johnson-Cook Model Comprehensiveness at Moderate Strain Rate and Inverse Analysis to Modify the Constitutive Parameters Using Cold Wire Drawing Process [Volume 8, Issue 3, 2019, Pages 41-56]
  • Davoodi, Sayyed Mohammad Reza Designing a New Model for Evaluating the Maintenance System [Volume 6, Issue 1, 2017, Pages 49-67]
  • Davoodi, Sayyed Mohammad Reza Prioritization of Lean-production Components with Fuzzy Network Analysis: A Case Study (Sam Electric Co.) [Volume 8, Issue 1, 2019, Pages 31-44]
  • Davoodi, Sayyed Mohammad Reza Designing an Improved Stochastic Planning Model for Supply Chain Considering Maintenance and Operations (MRO) in Rahiab Sanat Sepahan Engineering Technical Company [Volume 9, Issue 3, 2020, Pages 51-63]
  • Dehghani, Javad An Investigation of Using RCS-processed Intramedullary Stainless Steel 316L Nail in the Treatment of Diaphyseal Bone Fractures [Volume 10, Issue 3, 2021, Pages 59-75]
  • Dehghani, Javad Mechanical Stability of RCSed and ECAPed Intramedullary 316L Stainless Steel Nails in the Treatment of Diaphyseal Bone Fractures [Volume 10, Issue 4, 2021, Pages 37-49]
  • Dehghani, Mahdi Investigation of ECAR Routes on Mechanical Properties of Explosive-Welded Al-Cu Bimetal [Volume 3, Issue 4, 2014, Pages 83-92]
  • Dehghanpour, Sajjad Free Vibration Analysis of Sandwich Beams with FG Face Sheets Based on the High Order Sandwich Beam Theory [Volume 9, Issue 2, 2020, Pages 57-71]
  • Delfani, Ali Finite Element Simulation of Hydrostatic Extrusion Process to Produce Thin Bimetallic Parts [Volume 6, Issue 4, 2017, Pages 59-68]
  • Deylami, Ali Tracking Control of Robots Revisited Based on Taylor Series and Asymptotic Expansion [Volume 10, Issue 2, 2021, Pages 63-70]
  • Deylami, Ali Stability of Robust Lyapunov Based Control of Flexible-Joint Robots Using Voltage Control Strategy Revisited [Volume 10, Issue 4, 2021, Pages 13-25]
  • Doi, Takayuki Investigation the Effects of Layer Structure on the Tribological Behaviour of PAI Overlays Containing MoS2 [Volume 10, Issue 4, 2021, Pages 5-11]
  • Dwivedi, Suren N. Deformation of Al Alloy during Integrated Extrusion and ECAP: A Simulation Research [Volume 10, Issue 3, 2021, Pages 35-44]

E

  • Ebrahimi, Mohammad Reza Investigation of Springback Angle in Single Point Incremental Forming Process on Explosive Welded Cu/St/Cu Multilaye [Volume 8, Issue 3, 2019, Pages 13-26]
  • Eftekhari, Ali Optimum Designing of Forging Preform Die for the H-shaped Parts Using Backward Deformation Method and Neural Networks Algorithm [Volume 3, Issue 3, 2014, Pages 79-96]
  • Eftekhari, Seyyed Ali An Optimization on the DIN1.2080 Alloy in the Electrical Discharge Machining Process Using ANN and GA [Volume 6, Issue 1, 2017, Pages 33-47]
  • Enomoto, Kazuki Investigation the Effects of Layer Structure on the Tribological Behaviour of PAI Overlays Containing MoS2 [Volume 10, Issue 4, 2021, Pages 5-11]
  • Eskandari Jam, Jafar Assessment of Third‌-order Shear Deformation Graphene Nanoplate Response under Static Loading Using Modified Couple Stress Theory [Volume 11, Issue 1, 2022, Pages 41-57]
  • Eskandari Shahraki, Majid Assessment of Third‌-order Shear Deformation Graphene Nanoplate Response under Static Loading Using Modified Couple Stress Theory [Volume 11, Issue 1, 2022, Pages 41-57]
  • Esmaeili, Mohammad Dynamic Modeling of a Robot Manipulator for Opening the Tap Hole of an Electric Arc Furnace [Volume 8, Issue 4, 2019, Pages 17-24]
  • Esmaili, Mohammad Path Planning and Control of an Industrial Robot Used for Opening Tap Hole of an Electric Arc Furnace [Volume 9, Issue 4, 2020, Pages 5-14]
  • Etemadi Haghighi, Shahram Design and Fabrication of a Longitudinal Vibration Transmitter for Ultrasonic-Vibration Assisted Milling [Volume 9, Issue 4, 2020, Pages 39-45]

F

  • Fallah, Mohammad Meghdad Fallah Effect of Overage Hardening Heat Treatment on the Micro Structure and Hardness of Nickel-based Super Alloy Rene-80 [Volume 7, Issue 3, 2018, Pages 19-27]
  • Farahani, Mohammadreza A Hybrid Thermal Assisted Friction Stir Welding Approach for PMMA Sheets [Volume 6, Issue 2, 2017, Pages 51-60]
  • Farahnakian, Masoud Machinability Investigation of Inconel 657 in High-speed Turning [Volume 3, Issue 1, 2014, Pages 27-34]
  • Farahnakian, Masoud Experimental Study of Effective Parameters on Honing Process of Cast Iron Cylinder [Volume 4, Issue 3, 2015, Pages 5-12]
  • Farahnakian, Masoud Investigation of Magnetic Abrasive Finishing on Inner Surface of AL 6061 Tube [Volume 4, Issue 3, 2015, Pages 23-30]
  • Farahnakian, Masoud Experimental Investigation of the Surface Roughness in Grinding of BK7 Optical Glass in Brittle Mode [Volume 5, Issue 2, 2016, Pages 33-41]
  • Farahnakian, Masoud Machining Operation Parameters in Drilling Process; Variation of Thrust Forces in Epoxy Based Nanocomposites [Volume 5, Issue 3, 2016, Pages 5-11]
  • Farahnakian, Masoud Dry Friction and Wear Performance of Micro Surface Textures Generated by Ultrasonic Assisted Face Turning [Volume 5, Issue 4, 2016, Pages 21-33]
  • Farahnakian, Masoud Experimental Investigation of Subsurface Damages Made by Cup Grinding and Lapping Process of Optical Glass BK7 in Ductile Mode [Volume 6, Issue 1, 2017, Pages 15-24]
  • Farahnakian, Masoud A Study of Abrasive Media Effect on Deburring in Barrel Finishing Process [Volume 8, Issue 3, 2019, Pages 27-39]
  • Farahnakian, Masoud Experimental Study of Germanium Dry Machining with Various Rake Angles and Different Feed Rates of Tool [Volume 10, Issue 1, 2021, Pages 63-76]
  • Farahnakian, Masoud Experimental Study of the Effect of Different Spindle Speeds and Feed Rates in Dry Machining on a Brittle Material [Volume 10, Issue 4, 2021, Pages 51-59]
  • Farahnakyan, Masoud Machinability Improvement of 17-4PH Stainless Steel by Cryogenic Cooling [Volume 2, Issue 3, 2013, Pages 31-38]
  • Farhadi, Fatemeh Effect of Electrical Current on Nitinol Medical Staples Shape Memory [Volume 2, Issue 2, 2013, Pages 47-55]
  • Farhadipour, Pedram A New Temper Rolling Force Model for Dry Thick Strip Considering Fully Elastic Contact [Volume 3, Issue 4, 2014, Pages 25-32]
  • Farhadipour, Pedram Investigation of the Microscopic Aspect of the Stress Distribution in the Accumulative Roll Bonding Process Using the Slab Method [Volume 5, Issue 4, 2016, Pages 35-44]
  • Farhadipour, Pedram Analytical Modified Model of Cold Rolling Process and Investigation of the Effect of Work Roll Flattening on the Rolling Force [Volume 6, Issue 1, 2017, Pages 5-13]
  • Farsi, Mohammad Ali Designing Tolerance Chart and Process for CNC Machining Parts [Volume 2, Issue 2, 2013, Pages 23-30]
  • Fathi, Hasan Machinability Investigation of Inconel 657 in High-speed Turning [Volume 3, Issue 1, 2014, Pages 27-34]
  • Fazel, Dara Study the Percentage of Carbon and Ferrite in Layers of Steel (SA-516) by Strip Cladding with E316L [Volume 9, Issue 3, 2020, Pages 41-50]
  • Feizi, Masoud Finite Element Modeling and Experimental Study of the Spline Tube Forming [Volume 4, Issue 1, 2015, Pages 45-56]
  • Foroojani Zadeh, Kamyar Experimental Passive Suppression of the Regenerative Chatter Phenomenon by Variation of the Frequency and Amplitude of the Spindle Motor Excitation in Turning [Volume 5, Issue 4, 2016, Pages 13-19]
  • Freegah, Basim Optimization of Cutting Parameters Based on Production Time Using Colonial Competitive (CC) and Genetic (G) Algorithms [Volume 6, Issue 4, 2017, Pages 47-58]

G

  • Ganjali, Mona Analyzing Indexes of Agile Reverse logistics Using Interpretive Structural Modeling Approach [Volume 3, Issue 3, 2014, Pages 5-16]
  • Gao, Wei An Investigation on Formability and Crystallographic Texture in Novel Magnesium Alloys [Volume 10, Issue 3, 2021, Pages 19-24]
  • George, Lijohn P. A Solution for the Security Barrier of the Intelligent Manufacturing with Cloud Computing [Volume 10, Issue 4, 2021, Pages 27-35]
  • Ghafarirad, Hamed Design, Manufacturing and Surface quality Analysis of Machining by Self-Rotary Milling Tool [Volume 2, Issue 1, 2013, Pages 29-38]
  • Ghaffari, Sina Investigation of ECAR Routes on Mechanical Properties of Explosive-Welded Al-Cu Bimetal [Volume 3, Issue 4, 2014, Pages 83-92]
  • Ghani, Jaharah A. Fabrication of Various Dimple Shapes and Arrays on a Hypereutectic Al-Si Alloy Using a Turning Process [Volume 11, Issue 1, 2022, Pages 75-81]
  • Ghani, Mehrdad An Investigation on the Effect of Acidithiobacillus Ferrooxidans Bacteria on Biomachining of Titanium Alloy and Copper [Volume 9, Issue 1, 2020, Pages 25-32]
  • Gharehchahi, Hamidreza A New Geometry Modification Algorithm for Blank Shape Optimization in the Deep Drawing Process [Volume 9, Issue 4, 2020, Pages 15-25]
  • Gharehchahi, Hamidreza Numerical Study of Effective Parameters in the Deep Drawing Process of a Cylindrical Cup and Comparison with Experimental Results [Volume 9, Issue 2, 2020, Pages 31-42]
  • Ghasemi, Boozarjomehr Analytical, Experimental and Finite Element Investigation of Internal Pressure Effect in Hydroforming Process on Metallic Bellows Produced from Thin Wall Tube of Austenitic Stainless Steel Grade 316L [Volume 2, Issue 1, 2013, Pages 9-14]
  • Ghasemi, Bozarjomehr Optimization of parameters of Anti lock Braking System for use in deep drawing [Volume 2, Issue 1, 2013, Pages 19-28]
  • Ghasemian, Sepideh A Two-phase Model for Product Design Development and Evaluation and Supplier Selection in Product Configuration Change Process (Case study: SUPCO) [Volume 3, Issue 3, 2014, Pages 17-40]
  • Ghassemi, Aazam Empirical and Numerical Study of Gas Turbine Disks under Mechanical Stress and Temperature Gradient [Volume 8, Issue 2, 2019, Pages 57-72]
  • Ghayyem, Majed A Novel Optimization Approach Applied to Multi-Pass Turning Process [Volume 6, Issue 2, 2017, Pages 5-19]
  • Ghazavi, Mohammad Ali Design and Construction of Load Cell of a Three Point Hitch Dynamometer for Tractor John Deere 3140 [Volume 3, Issue 2, 2014, Pages 47-58]
  • Ghazavi, Mohammad Ali Desiging, Part Selecting and Fabrication Procedure of the Vaccum Section of a Leaf Vacuum Shredder Machine [Volume 2, Issue 2, 2013, Pages 31-38]
  • Ghazi Mir Saeed, Akbar Experimental Investigation and Numerical Simulation of the Mechanical Behavior of a Novel Honeycomb Core Sandwich Panels Formed by Hydroforming Process [Volume 5, Issue 3, 2016, Pages 23-39]
  • Gheiratmand Haghighi, Gholamali Comparison of ZAMAK 2 and ZAMAK 3 Alloys Produced by Powder Metallurgy Process [Volume 10, Issue 3, 2021, Pages 45-58]
  • Gheisari, Hassan Investigation of the Model of Microscopic Contact Parameters for Grinding M200 Using Elastic Abrasive Tool [Volume 3, Issue 4, 2014, Pages 33-44]
  • Gheisari, Hassan Characterization and Investigation of Grain Selection in Spiral Grain Selectors during Casting Single-Crystal Turbine Blades [Volume 4, Issue 1, 2015, Pages 19-28]
  • Gheisari, Hassan Survey and Study of Machinability for Titanium Alloy Ti-6Al-4V through Chip Formation in Milling Process [Volume 4, Issue 2, 2015, Pages 5-12]
  • Gheisari, Hassan The Role of SiC and Different Binders on Mechanical Strength and Compaction of Silica Based Refractoriness Materials [Volume 4, Issue 3, 2015, Pages 13-22]
  • Gheisari, Hassan Survey and Effects of Manufacture and Assembly Errors on the Output Error of Globoidal Cam Mechanisms [Volume 4, Issue 4, 2015, Pages 5-14]
  • Ghorbani, Bahman Analytical and Numerical Investigation of Significant Parameters on Strength of Electromagnetically Assembled Aluminum Tube Joints [Volume 3, Issue 1, 2014, Pages 35-46]
  • Ghorbani, Bahman Analytical and Numerical Investigation of Significant Parameters on Strength of Electromagnetically Assembled Products Joints [Volume 2, Issue 4, 2013, Pages 29-38]
  • Ghoreishi, Majid Numerical and Experimental Study of Geometrical Dimensions on Laser-TIG Hybrid Welding of Stainless Steel 1.4418 [Volume 5, Issue 2, 2016, Pages 21-31]
  • Golabi, Sa’id Numerical and Analytical Investigation of a Cylinder Made of Functional Graded Materials under Thermo-Mechanical Fields [Volume 5, Issue 3, 2016, Pages 59-68]
  • Golzar, Mohammad Investigation of Parameters Effect Resin Movement Velocity at Vacuum Assisted Resin Transfer Molding Method (VARTM) [Volume 2, Issue 1, 2013, Pages 3-8]
  • Goodarzi, Mohammad Robust Lyapunov-based Control of MEMS Optical Switches [Volume 4, Issue 3, 2015, Pages 59-71]
  • Goodarzi, Mohammad Robust Fractional Order Control of Under-actuated Electromechanical System [Volume 5, Issue 1, 2016, Pages 69-86]
  • Goodarzi, Mohammad Fractional Order Control of Micro Electro-Mechanical Systems [Volume 5, Issue 2, 2016, Pages 55-67]

H

  • Habibi, Sara Solving Re-entrant No-wait Flexible Flowshop Scheduling Problem; Using the Bottleneck-based Heuristic and Genetic Algorithm [Volume 7, Issue 2, 2018, Pages 65-77]
  • Habibi, Sara Feature Selection in Big Data by Using the enhancement of Mahalanobis–Taguchi System; Case Study, Identifiying Bad Credit clients of a Private Bank of Islamic Republic of Iran [Volume 7, Issue 3, 2018, Pages 29-44]
  • Haddadi, Ali Akbar The Effect of Annealing Heat Treatment on the Bond of Explosivewelded Copper/Steel after the ECAR Process [Volume 8, Issue 2, 2019, Pages 29-38]
  • Hadipour Moradi, Sepideh Optimization of Cutting Parameters Based on Production Time Using Colonial Competitive (CC) and Genetic (G) Algorithms [Volume 6, Issue 4, 2017, Pages 47-58]
  • Haghighi, Ahmad Reza Solving Re-entrant No-wait Flexible Flowshop Scheduling Problem; Using the Bottleneck-based Heuristic and Genetic Algorithm [Volume 7, Issue 2, 2018, Pages 65-77]
  • Haghpanahi, Mohammad Numerical Simulation of Homogeneous, Two and Three Lattice Layers Scaffolds with Constant Density [Volume 9, Issue 2, 2020, Pages 5-22]
  • Haghshenas, Abouzar The Mechanical Properties of PA6/NBR/clay/CaCO3 Hybrid Nanocomposites [Volume 10, Issue 1, 2021, Pages 19-30]
  • Haron, Che Hassan Che Fabrication of Various Dimple Shapes and Arrays on a Hypereutectic Al-Si Alloy Using a Turning Process [Volume 11, Issue 1, 2022, Pages 75-81]
  • Hasan Nejad, Essa Friction Stir Welding of Dissimilar Poly Methyl Methacrylate and Polycarbonate Sheets [Volume 6, Issue 4, 2017, Pages 35-46]
  • Hasanzadeh, Nahid Performing a Calcium-Phosphate Layer on Porous NiTi Alloy for Using in Orthopedic Applications [Volume 2, Issue 4, 2013, Pages 45-50]
  • Hasanzadeh Nemati, Nahid The Effect of the Third Element on Corrosion Behavior and Phase Structure of Fe35Mn Alloy Fabricated by Spark Plasma Sintering (SPS) [Volume 7, Issue 4, 2018, Pages 31-39]
  • Hasanzadeh Nemati, Nahid Effect of Electrical Potential on the Morphology of Polyvinyl Alcohol/ Sodium Alginate Electrospun Nanofibers, Containing Herbal Extracts of Calendula Officinalis for Using in Biomedical Applications [Volume 9, Issue 2, 2020, Pages 43-56]
  • Hasanzadeh Nematy, Nahid Effect of Electrical Current on Nitinol Medical Staples Shape Memory [Volume 2, Issue 2, 2013, Pages 47-55]
  • Hashemi, Javad Failure Evaluation of Cupronickel Alloy Used in the Condenser of the Desalination Unit [Volume 11, Issue 1, 2022, Pages 21-40]
  • Hashemi, Ramin Evaluation of Damage Problems in the Water Pump Components of an Air Compressor Cooling System: a Case Study [Volume 5, Issue 3, 2016, Pages 13-21]
  • Hashemi, Seyed Jalal Investigation of the Effect of Different Forming Pressure Curves on Formability of AA1050 Tubes in Warm Hydroforming Process [Volume 10, Issue 1, 2021, Pages 51-61]
  • Hashemi, Seyed Jalal Numerical and Experimental Investigation of Thickness Distribution in Hydromechanical Deep Drawing Process of Square Parts [Volume 10, Issue 2, 2021, Pages 5-12]
  • Hashempour, Mazdak Investigation on Wear Behavior of W-Cu Nanocomposite Fabricated Through Thermochemical Synthesis [Volume 2, Issue 3, 2013, Pages 39-46]
  • Hashemzadeh, Majid The Effect of Power and Maximum Cutting Speed on the Material Removal Rate and Cutting Volume Efficiency in CO2 Laser Cutting of Polycarbonate Sheets [Volume 9, Issue 1, 2020, Pages 5-23]
  • Hashemzadeh, Majid The Effect of Power, Maximum Cutting Speed and Specific Point Energy on the Material Removal Rate and Cutting Volume Efficiency in CO2 Laser Cutting of Polyamide Sheets [Volume 9, Issue 3, 2020, Pages 23-39]
  • Hassanzadeh Nemati, Nahid Fabrication of Porous Segments Using Ti-6Al-4V Chips for Orthopaedic Applications [Volume 4, Issue 4, 2015, Pages 59-65]
  • Hebatalrahman, Ahmed An Investigation of the Manufacturing Process, Structure, and Performance of the New Micro and Nano Thermoplastic-based Composites Prepared with Zeolite Filler [Volume 11, Issue 1, 2022, Pages 5-19]
  • Heidari, Shahin Imperialist Competitive Algorithm (ICA) Approach for Optimization of the Surface Grinding Process [Volume 9, Issue 1, 2020, Pages 51-62]
  • Heidari, Shahin Evaluation of Optimal Conditions, Microstructure, and Mechanical Properties of Aluminum to Copper Joints Welded by FSW [Volume 9, Issue 4, 2020, Pages 61-81]
  • Heidari, Shahin Study of Mechanical Properties of 7075 Aluminum Alloy Due to Particle Size Reduction due to Constrained Groove Pressing CGP Process [Volume 10, Issue 1, 2021, Pages 5-18]
  • Heidari, Shahin An Investigation of Using RCS-processed Intramedullary Stainless Steel 316L Nail in the Treatment of Diaphyseal Bone Fractures [Volume 10, Issue 3, 2021, Pages 59-75]
  • Heidari, Shahin Mechanical Stability of RCSed and ECAPed Intramedullary 316L Stainless Steel Nails in the Treatment of Diaphyseal Bone Fractures [Volume 10, Issue 4, 2021, Pages 37-49]
  • Hesampour, Abolfazl A Method for Ranking, Assessment and Evaluation of Sustainability Factors in Project [Volume 5, Issue 1, 2016, Pages 29-44]
  • Heydari Beni, Mohsen Assessment of Third‌-order Shear Deformation Graphene Nanoplate Response under Static Loading Using Modified Couple Stress Theory [Volume 11, Issue 1, 2022, Pages 41-57]
  • Heydari Vini, Mohammad Using Experimental Procedure to Improve the Efficiency of the Two Stand Reversing Cold Mill [Volume 3, Issue 2, 2014, Pages 27-36]
  • Heydari Vini, Mohammad A New Temper Rolling Force Model for Dry Thick Strip Considering Fully Elastic Contact [Volume 3, Issue 4, 2014, Pages 25-32]
  • Heydari Vini, Mohammad Numerical Simulation of the Effect of Elastic Deformation of work rolls on the rolling force and Comparison with the Results obtained by the Slab Method during the reciprocating cold rolling [Volume 2, Issue 4, 2013, Pages 21-28]
  • Heydari Vini, Mohammad Investigation of the Microscopic Aspect of the Stress Distribution in the Accumulative Roll Bonding Process Using the Slab Method [Volume 5, Issue 4, 2016, Pages 35-44]
  • Heydari Vini, Mohammad Analytical Modified Model of Cold Rolling Process and Investigation of the Effect of Work Roll Flattening on the Rolling Force [Volume 6, Issue 1, 2017, Pages 5-13]
  • Heydari Vini1, Mohammad Using Artificial Neural Networks to Predict Rolling Force and Real Exit Thickness of Steel Strips [Volume 3, Issue 3, 2014, Pages 53-60]
  • Hojaji, Mohamad Designing and Manufacturing the Multiple Jets Simulator and Experimental Investigation of the Multiple Jets in Crossflow [Volume 3, Issue 4, 2014, Pages 5-24]
  • Hojaji, Mohamad Design and Manufacturing of Jet to free Stream Simulator to Experimental Study of Interaction of Oblique Jet in Crossflow [Volume 4, Issue 1, 2015, Pages 65-81]
  • Hojaji, Mohammad The Analysis of Experimental Process of Production, Stabilizing and Measurement of the Thermal Conductivity Coefficient of Water/Graphene Oxide as a Cooling Nanofluid in Machining [Volume 5, Issue 2, 2016, Pages 43-53]
  • Honarpisheh, Mohammad Investigation of ECAR Routes on Mechanical Properties of Explosive-Welded Al-Cu Bimetal [Volume 3, Issue 4, 2014, Pages 83-92]
  • Honarpisheh, Mohammad Experimental Investigation of Thermal Conductivity of Aluminum Alloy 3003 Produced by Equal Channel Angular Rolling Process [Volume 4, Issue 4, 2015, Pages 29-38]
  • Honarpisheh, Mohammad Numerical and Experimental Investigation of Thickness Variation in the Spinning Process of Al-1060 Alloy [Volume 5, Issue 4, 2016, Pages 5-12]
  • Honarpisheh, Mohammad The Effect of Annealing Heat Treatment on the Bond of Explosivewelded Copper/Steel after the ECAR Process [Volume 8, Issue 2, 2019, Pages 29-38]
  • Honarpisheh, Mohammad Investigation of Springback Angle in Single Point Incremental Forming Process on Explosive Welded Cu/St/Cu Multilaye [Volume 8, Issue 3, 2019, Pages 13-26]
  • Hori Najafabadi, Ali Determination the Mechanical Stress on the Cutter Bar of the Harvesting Combine by Abaqus [Volume 4, Issue 2, 2015, Pages 47-56]
  • Horry, Marzieh Relationship between Technology Management and Operational Performance in Manufacturing Companies [Volume 6, Issue 4, 2017, Pages 69-79]
  • Horry Najafabadi, Marzieh Relationship Between Operational Performance in Industrial Manufacturing Companies with Approaches of Innovation, Quality, Efficiency and Productivity [Volume 7, Issue 1, 2018, Pages 29-38]
  • Hortamani, Amir Designing an Improved Stochastic Planning Model for Supply Chain Considering Maintenance and Operations (MRO) in Rahiab Sanat Sepahan Engineering Technical Company [Volume 9, Issue 3, 2020, Pages 51-63]
  • Hoseini, Pedram Study of Vibration Specifications of a Three-axle Truck Using Lagrange Method [Volume 8, Issue 2, 2019, Pages 5-17]
  • Hosseiniasl, Mehrdad A Heuristic Approach for Optimization of Gearbox Dimension [Volume 7, Issue 2, 2018, Pages 17-39]
  • Hosseinzadeh Lotfi, Farhad Performance Evaluation of Banking Organizations Using the New Proposed Integrated DEA-BSC Model [Volume 8, Issue 1, 2019, Pages 73-90]
  • Hosseinzadeh Samani, Bahram Determination the Mechanical Stress on the Cutter Bar of the Harvesting Combine by Abaqus [Volume 4, Issue 2, 2015, Pages 47-56]
  • Hosseinzadeh Samani, Bahram Design, Fabrication, and Assessment of a Hydrodynamic Reactor for Biodiesel Production [Volume 11, Issue 1, 2022, Pages 83-94]

I

  • Iranzadeh, Soleyman Extracting Manufacturing Process Map in the Form of the IDEF Model Prerequisite for the Implementation of PFMEA in the Sugar Industry [Volume 7, Issue 2, 2018, Pages 79-93]

J

  • Jabbari, Keyhan The Effect of Artificial Aging Treatment and Lubrication Modes on the Cutting Force and the Chip Surface Morphology when Drilling Al-Si-Mg (A356) Cast Alloys [Volume 7, Issue 1, 2018, Pages 39-48]
  • Jafari, Esmaeil Predicting the Influence of Electrical Discharge Machining (EDM) Parameters on the Finished Work Surface in CK45 Steel [Volume 9, Issue 1, 2020, Pages 63-78]
  • Jafari, Esmaeil The Recommend of Filler Metal to Increasing the Corrosion Resistance of Gas Pipeline [Volume 9, Issue 3, 2020, Pages 5-12]
  • Jafari, Esmaeil An Electrochemical Investigation on the Effect of Heat-Stable Salts on the Corrosion Resistance of Carbon Steel in MDEA Solution [Volume 10, Issue 3, 2021, Pages 5-18]
  • Jafari, Jaleel Evaluation of Optimal Conditions, Microstructure, and Mechanical Properties of Aluminum to Copper Joints Welded by FSW [Volume 9, Issue 4, 2020, Pages 61-81]
  • Jafarian Jam, Nathan Experimental Study of Packing Time and Melt Temperature Effects on Shrinkage of a Thin Sheet Made of Wood-HDPE Composite [Volume 5, Issue 1, 2016, Pages 5-15]
  • Jafari Fesharaki, Javad Numerical and Analytical Investigation of a Cylinder Made of Functional Graded Materials under Thermo-Mechanical Fields [Volume 5, Issue 3, 2016, Pages 59-68]
  • Jafari Fesharaki, Javad Stress Concentration Factor in a Functionally Graded Material Plate around a Hole [Volume 6, Issue 1, 2017, Pages 69-81]
  • Jafari Fesharaki, Javad Numerical/Experimental Analysis of the Deformation of Tubes under Concentrated Load [Volume 6, Issue 3, 2017, Pages 35-46]
  • Jafari Fesharaki, Javad A Heuristic Approach for Optimization of Gearbox Dimension [Volume 7, Issue 2, 2018, Pages 17-39]
  • Jafari Nedoushan, Reza Finite Element Modeling and Experimental Study of the Spline Tube Forming [Volume 4, Issue 1, 2015, Pages 45-56]
  • Jafarpour, Vahid Experimental Study on In-Depth Residual Stress due to 420 Stainless Steel Creep-Feed Grinding Using the Deflection-Electro Polishing Technique [Volume 11, Issue 1, 2022, Pages 59-74]
  • Jahangiri, Mehdi Investigation of the Slipping Wear based on the Rate of Entropy Generation [Volume 3, Issue 1, 2014, Pages 47-58]
  • Jahangiri, Mehdi Investigation on Wear Behavior of W-Cu Nanocomposite Fabricated Through Thermochemical Synthesis [Volume 2, Issue 3, 2013, Pages 39-46]
  • Jahangir Moshayedi, Ata Gentle Survey on MIR Industrial Service Robots: Review & Design [Volume 10, Issue 1, 2021, Pages 31-50]
  • Jahngiri, Mehdi 3-D Numerical Investigation of Flow Field in Starting Stage of High Speed Wind Tunnels [Volume 2, Issue 2, 2013, Pages 39-46]
  • Jalali Asbforoshani, Hossein Design and Fabrication of a Longitudinal Vibration Transmitter for Ultrasonic-Vibration Assisted Milling [Volume 9, Issue 4, 2020, Pages 39-45]
  • Jaleel, Ashidsha A Solution for the Security Barrier of the Intelligent Manufacturing with Cloud Computing [Volume 10, Issue 4, 2021, Pages 27-35]
  • Jamshidian, Morteza Predicting Failure in the Hydraulic Lift Structures with Monitoring and Fuzzy Logic [Volume 3, Issue 2, 2014, Pages 37-46]
  • Juaifer, Adil Hussein The Effectiveness of Ceramic Wiper Tool in Turning of Monel K500 [Volume 7, Issue 2, 2018, Pages 47-64]

K

  • Kafaei Kavoshian, Nazanin Experimental Investigation and Numerical Simulation of the Mechanical Behavior of a Novel Honeycomb Core Sandwich Panels Formed by Hydroforming Process [Volume 5, Issue 3, 2016, Pages 23-39]
  • Karami, Mohammad Mehdi Production Optimization on the Flow Shop Scheduling Problem: A Simulation Study [Volume 10, Issue 2, 2021, Pages 41-51]
  • Karamian, Ebrahim Characterization and Investigation of Grain Selection in Spiral Grain Selectors during Casting Single-Crystal Turbine Blades [Volume 4, Issue 1, 2015, Pages 19-28]
  • Karamian, Ebrahim Survey and Study of Machinability for Titanium Alloy Ti-6Al-4V through Chip Formation in Milling Process [Volume 4, Issue 2, 2015, Pages 5-12]
  • Karamian, Ebrahim The Role of SiC and Different Binders on Mechanical Strength and Compaction of Silica Based Refractoriness Materials [Volume 4, Issue 3, 2015, Pages 13-22]
  • Karamian, Ebrahim Survey and Effects of Manufacture and Assembly Errors on the Output Error of Globoidal Cam Mechanisms [Volume 4, Issue 4, 2015, Pages 5-14]
  • Karamian, Ebrahim Survey of AZ31/HA-Zeolite Nano Crystalline Biocomposite with Powder Metallurgy (PM) [Volume 5, Issue 2, 2016, Pages 5-11]
  • Karami Pirmohammadi, Bahman Simulation and Analysis of the New Brake System according to Changing of the Spring and Vertical Acceleration of the Wheels [Volume 5, Issue 4, 2016, Pages 57-70]
  • Karevan, Ali Analyze the Effect of the Maintenance Activities on the Internet Sustainability by Using 2k Factorial Experiment Design [Volume 7, Issue 2, 2018, Pages 5-16]
  • Karimi, Jafar Imperialist Competitive Algorithm (ICA) Approach for Optimization of the Surface Grinding Process [Volume 9, Issue 1, 2020, Pages 51-62]
  • Karimian, Majid Survey of AZ31/HA-Zeolite Nano Crystalline Biocomposite with Powder Metallurgy (PM) [Volume 5, Issue 2, 2016, Pages 5-11]
  • Karimisharifabadi, Jafar Study the Percentage of Carbon and Ferrite in Layers of Steel (SA-516) by Strip Cladding with E316L [Volume 9, Issue 3, 2020, Pages 41-50]
  • Karimkhani, Behzad Design and Construction of Electromechanical Wrist Hand Orthosis with a Functional Interface [Volume 7, Issue 4, 2018, Pages 57-70]
  • Kashisaz, Sara The Milling of Metalsthrough Adaptive Neuro-FuzzyInference System (ANFIS) for non-touch Measuring of the Temperature to Reduce Coolant [Volume 9, Issue 2, 2020, Pages 23-30]
  • Kasim, Mohd Shahir Fabrication of Various Dimple Shapes and Arrays on a Hypereutectic Al-Si Alloy Using a Turning Process [Volume 11, Issue 1, 2022, Pages 75-81]
  • Kazazi, Mahdi Effect of Overage Hardening Heat Treatment on the Micro Structure and Hardness of Nickel-based Super Alloy Rene-80 [Volume 7, Issue 3, 2018, Pages 19-27]
  • Kazemzadeh-Parsi, Mohammad Javad A New Geometry Modification Algorithm for Blank Shape Optimization in the Deep Drawing Process [Volume 9, Issue 4, 2020, Pages 15-25]
  • Kazemzadeh-Parsi, Mohammad Javad Numerical Study of Effective Parameters in the Deep Drawing Process of a Cylindrical Cup and Comparison with Experimental Results [Volume 9, Issue 2, 2020, Pages 31-42]
  • Kazerooni, Afshin Experimental Investigation and Numerical Simulation of the Mechanical Behavior of a Novel Honeycomb Core Sandwich Panels Formed by Hydroforming Process [Volume 5, Issue 3, 2016, Pages 23-39]
  • Kebreyaeezade, Asghar Integer-order Versus Fractional-order Adaptive Fuzzy Control of Electrically Driven Robots with Elastic Joints [Volume 7, Issue 3, 2018, Pages 59-70]
  • Kermani, Ehsan An Investigation on the Microstructure and Impression Creep Behavior of the Magnesium Alloys [Volume 9, Issue 1, 2020, Pages 43-49]
  • Keshavarz, Sirous Organizational Agility and Knowledge Sharing Process in the Staffs of the Iran's Central Plateau Contractor Company [Volume 6, Issue 3, 2017, Pages 59-65]
  • Keshvari, Hamid Effect of Electrical Potential on the Morphology of Polyvinyl Alcohol/ Sodium Alginate Electrospun Nanofibers, Containing Herbal Extracts of Calendula Officinalis for Using in Biomedical Applications [Volume 9, Issue 2, 2020, Pages 43-56]
  • Khademi Zadeh, Hassan The Optimization of the Effective Parameters of the Die in Parallel Tubular Channel Angular Pressing Process by Using Neural Network and Genetic Algorithm Methods [Volume 6, Issue 2, 2017, Pages 21-35]
  • Khajehpour, Salar An Investigation of Using RCS-processed Intramedullary Stainless Steel 316L Nail in the Treatment of Diaphyseal Bone Fractures [Volume 10, Issue 3, 2021, Pages 59-75]
  • Khajehpour, Salar Mechanical Stability of RCSed and ECAPed Intramedullary 316L Stainless Steel Nails in the Treatment of Diaphyseal Bone Fractures [Volume 10, Issue 4, 2021, Pages 37-49]
  • Khakzar Bafruei, Morteza Development of Linguistic Rules Diagnosis of Failure in Centrifugal Pump for Use in Expert System [Volume 4, Issue 2, 2015, Pages 67-82]
  • Khaledan, Siyavash A Comparison of Job-Shop and Group Technology Using Simulation by ARENA [Volume 3, Issue 1, 2014, Pages 59-66]
  • Khaledan, Siyavash A Comparison of Job-shop and Group Technology Using Simulation by ARENA [Volume 2, Issue 4, 2013, Pages 3-12]
  • Khalili, Khalil Three Dimensional Model Reconstruction of a Cuboid Based on Stereo Vision [Volume 8, Issue 4, 2019, Pages 25-35]
  • Khanaki, Hamid Numerical Simulation of Homogeneous, Two and Three Lattice Layers Scaffolds with Constant Density [Volume 9, Issue 2, 2020, Pages 5-22]
  • Khanbeigi, Masoud Ahmad A Hybrid Thermal Assisted Friction Stir Welding Approach for PMMA Sheets [Volume 6, Issue 2, 2017, Pages 51-60]
  • Khandaie, Mehrdad Using Rubber Pad Forming Process for Local Compression in Assembling of Vehicle Structure Tubes [Volume 2, Issue 2, 2013, Pages 15-22]
  • Khani, Salman Machinability Improvement of 17-4PH Stainless Steel by Cryogenic Cooling [Volume 2, Issue 3, 2013, Pages 31-38]
  • Khashei, Mehdi Improving the Performance of Forecasting Models with Classical Statistical and Intelligent Models in Industrial Productions [Volume 10, Issue 2, 2021, Pages 13-26]
  • Kheiralipour, Kamran Three Dimensional Model Reconstruction of a Cuboid Based on Stereo Vision [Volume 8, Issue 4, 2019, Pages 25-35]
  • Kheirkhahan, Payam Robust Anti-Windup Control Design for PID Controllers–Theory and Experimental Verification [Volume 6, Issue 3, 2017, Pages 5-34]
  • Kheirkhahan, Payam Robust Control of Electrically Driven Robots in the Task Space [Volume 6, Issue 4, 2017, Pages 5-22]
  • Kheirkhahan, Payam Robust Fractional-order Control of Flexible-Joint Electrically Driven Robots [Volume 7, Issue 1, 2018, Pages 5-19]
  • Kheirkhahan, Payam An Alternative Stability Proof for Direct Adaptive Function Approximation Techniques Based Control of Robot Manipulators [Volume 7, Issue 2, 2018, Pages 41-46]
  • Khodsetan, Mohsen Numerical and Experimental Study of Residual Stress Measurement and Thickness Distribution of T-shape Steel Tube Produced by Tube Hydroforming [Volume 8, Issue 1, 2019, Pages 45-58]
  • Khoei, Amir Hossein Machinability Investigation of Inconel 657 in High-speed Turning [Volume 3, Issue 1, 2014, Pages 27-34]
  • Khorasani, Mohammad Taghi Effect of Electrical Potential on the Morphology of Polyvinyl Alcohol/ Sodium Alginate Electrospun Nanofibers, Containing Herbal Extracts of Calendula Officinalis for Using in Biomedical Applications [Volume 9, Issue 2, 2020, Pages 43-56]
  • Khorshidnia, Hossein Assessment the Wear Properties of Biodiesel-diesel Blends with the Addition of Copper Oxide Nanoparticles [Volume 8, Issue 4, 2019, Pages 37-55]
  • Khosravifard, Ali Investigation of Parameters Affecting Surface Integrity and Material Removal during Electrical Discharge Machining of HARDOX-400 Steel [Volume 9, Issue 2, 2020, Pages 73-84]
  • Khosrojerdi, Mohammad Reza Development of a New Dynamic Friction Model for Analytical Modeling of Elliptical Vibration Assisted Turning Process [Volume 5, Issue 3, 2016, Pages 69-78]
  • Kianfar, Kianoosh Performance Evaluation of Banking Organizations Using the New Proposed Integrated DEA-BSC Model [Volume 8, Issue 1, 2019, Pages 73-90]
  • Kirshkov, Pavel An Investigation on the Application of CNT-Aluminum Nanocomposite in Mechanical Alloying [Volume 9, Issue 4, 2020, Pages 47-59]
  • Kolahdooz, Amin An Optimization on the DIN1.2080 Alloy in the Electrical Discharge Machining Process Using ANN and GA [Volume 6, Issue 1, 2017, Pages 33-47]
  • Kolahdooz, Amin A Novel Optimization Approach Applied to Multi-Pass Turning Process [Volume 6, Issue 2, 2017, Pages 5-19]
  • Kolahdooz, Amin Experimental and FEM Analysis of Ribs Defects on Composite Lattice Cylindrical Shells [Volume 7, Issue 3, 2018, Pages 5-18]
  • Kolahdooz, Amin Gentle Survey on MIR Industrial Service Robots: Review & Design [Volume 10, Issue 1, 2021, Pages 31-50]
  • Kolahdouzan, Mojtaba Simulation of a Microgripper with Electrothermal Actuator Using COMSOL Software Based on the Finite Element Method [Volume 2, Issue 3, 2013, Pages 47-54]
  • Kotobi, Mahdi Experimental Investigation of Thermal Conductivity of Aluminum Alloy 3003 Produced by Equal Channel Angular Rolling Process [Volume 4, Issue 4, 2015, Pages 29-38]

L

  • Latifi Rostami, Seyyed Ali Experimental and FEM Analysis of Ribs Defects on Composite Lattice Cylindrical Shells [Volume 7, Issue 3, 2018, Pages 5-18]
  • Liakov, Jasmin An Investigation on the Application of CNT-Aluminum Nanocomposite in Mechanical Alloying [Volume 9, Issue 4, 2020, Pages 47-59]
  • Liao, Liefa Gentle Survey on MIR Industrial Service Robots: Review & Design [Volume 10, Issue 1, 2021, Pages 31-50]
  • Loghmanian, Sayed Mohammad Reza A New Temper Rolling Force Model for Dry Thick Strip Considering Fully Elastic Contact [Volume 3, Issue 4, 2014, Pages 25-32]
  • Loh Mousavi, Mohsen Optimum Designing of Forging Preform Die for the H-shaped Parts Using Backward Deformation Method and Neural Networks Algorithm [Volume 3, Issue 3, 2014, Pages 79-96]
  • Loh-Mousavi, Mohsen Numerical Analysis of the Effect of Sinusoidal Pressure Path on Thinning of Tube in Hot Metal Free Bulging Process [Volume 5, Issue 1, 2016, Pages 45-51]
  • Lotfi, Mohammad Numerical Analysis of Delamination Buckling in Composite Cylindrical Shell under Uniform External Pressure: Cohesive Element Method [Volume 6, Issue 3, 2017, Pages 77-96]
  • Lotfi, Mohammad The Effectiveness of Ceramic Wiper Tool in Turning of Monel K500 [Volume 7, Issue 2, 2018, Pages 47-64]

M

  • Madani, Seyed Ghasem Numerical and Analytical Investigation of a Cylinder Made of Functional Graded Materials under Thermo-Mechanical Fields [Volume 5, Issue 3, 2016, Pages 59-68]
  • Madani, Seyed Ghasem Stress Concentration Factor in a Functionally Graded Material Plate around a Hole [Volume 6, Issue 1, 2017, Pages 69-81]
  • Madani, Seyed Ghasem Numerical/Experimental Analysis of the Deformation of Tubes under Concentrated Load [Volume 6, Issue 3, 2017, Pages 35-46]
  • Mahammadi, Mehdi The Effect of Power and Maximum Cutting Speed on the Material Removal Rate and Cutting Volume Efficiency in CO2 Laser Cutting of Polycarbonate Sheets [Volume 9, Issue 1, 2020, Pages 5-23]
  • Mahdieh, Mohammad Sajjad A Study of Abrasive Media Effect on Deburring in Barrel Finishing Process [Volume 8, Issue 3, 2019, Pages 27-39]
  • Mahmoud Aghdami, Ashkan Study of Johnson-Cook Model Comprehensiveness at Moderate Strain Rate and Inverse Analysis to Modify the Constitutive Parameters Using Cold Wire Drawing Process [Volume 8, Issue 3, 2019, Pages 41-56]
  • Mahmoudzadeh, Amir Mechanical Properties of Concrete Containing Tire Rubber Particles toward Constant Development [Volume 2, Issue 4, 2013, Pages 13-20]
  • Majidi, Mohammad Hossein Effect of Coating Process Parameters on Corrosion Behavior of Ti-6Al-4V [Volume 9, Issue 1, 2020, Pages 33-42]
  • Mallahi Kolahi, Pouya Optimal Trajectory Planning for an Industrial Mobile Robot using Optimal Control Theory [Volume 10, Issue 3, 2021, Pages 25-34]
  • Manafi, Sahebali Comparison of ZAMAK 2 and ZAMAK 3 Alloys Produced by Powder Metallurgy Process [Volume 10, Issue 3, 2021, Pages 45-58]
  • Mansouri, Ehsan A Mixed Integer Nonlinear Programming for Facility Layout Problem with Maintenance Constraints [Volume 9, Issue 4, 2020, Pages 27-37]
  • Mansouri, Hadi The Effect of Annealing Heat Treatment on the Bond of Explosivewelded Copper/Steel after the ECAR Process [Volume 8, Issue 2, 2019, Pages 29-38]
  • Mansouri, Hadi Investigation of Springback Angle in Single Point Incremental Forming Process on Explosive Welded Cu/St/Cu Multilaye [Volume 8, Issue 3, 2019, Pages 13-26]
  • Meghdadi, Amir Homayoon The Analysis of Experimental Process of Production, Stabilizing and Measurement of the Thermal Conductivity Coefficient of Water/Graphene Oxide as a Cooling Nanofluid in Machining [Volume 5, Issue 2, 2016, Pages 43-53]
  • Mehdi Pour Omrani, Ali The Effect of Chemical Composition on Wear and Microstructural Properties of Babbitt Coatings [Volume 2, Issue 4, 2013, Pages 39-44]
  • Mehrabi, Vahid Study the Percentage of Carbon and Ferrite in Layers of Steel (SA-516) by Strip Cladding with E316L [Volume 9, Issue 3, 2020, Pages 41-50]
  • Meskin, Mehdi Design, Manufacturing and Surface quality Analysis of Machining by Self-Rotary Milling Tool [Volume 2, Issue 1, 2013, Pages 29-38]
  • Mirmohammadi, Ali Numerical Approach Toward Calculation of Vibration Characteristics of the Multi Axles Truck Using Lagrange Method [Volume 4, Issue 1, 2015, Pages 57-64]
  • Mir Mohammad Sadeghi, Omid Experimental Investigation of Effective Parameters at Laser Sintering the Mixture of Iron and Copper Powder [Volume 2, Issue 2, 2013, Pages 3-14]
  • Moghadami, Zahra The Effect of Chemical Composition on Wear and Microstructural Properties of Babbitt Coatings [Volume 2, Issue 4, 2013, Pages 39-44]
  • Moghadasi, Hesam Evaluation of Damage Problems in the Water Pump Components of an Air Compressor Cooling System: a Case Study [Volume 5, Issue 3, 2016, Pages 13-21]
  • Moghri, Mehdi Machining Operation Parameters in Drilling Process; Variation of Thrust Forces in Epoxy Based Nanocomposites [Volume 5, Issue 3, 2016, Pages 5-11]
  • Mohammadi, Aminolah Design, Manufacturing and Surface quality Analysis of Machining by Self-Rotary Milling Tool [Volume 2, Issue 1, 2013, Pages 29-38]
  • Mohammadi, Mehrdad A New Geometry Modification Algorithm for Blank Shape Optimization in the Deep Drawing Process [Volume 9, Issue 4, 2020, Pages 15-25]
  • Mohammadi, Mehrdad Numerical Study of Effective Parameters in the Deep Drawing Process of a Cylindrical Cup and Comparison with Experimental Results [Volume 9, Issue 2, 2020, Pages 31-42]
  • Mohammadi, Shahed Optimization of Cutting Parameters Based on Production Time Using Colonial Competitive (CC) and Genetic (G) Algorithms [Volume 6, Issue 4, 2017, Pages 47-58]
  • Mohammadi Kuhbanani, Hamidreza Effects of Tool Tilt Angle and Plunge Depth on Properties of Polycarbonate FSW Joint [Volume 7, Issue 4, 2018, Pages 41-55]
  • Mohammadnezhad, Mahyar Investigating the Effect of Titanium Addition on the Microstructure and Mechanical Properties of Ni-Hard 4 Cast Iron [Volume 5, Issue 1, 2016, Pages 17-27]
  • Moharrami, Rasoul Experimental Study on In-Depth Residual Stress due to 420 Stainless Steel Creep-Feed Grinding Using the Deflection-Electro Polishing Technique [Volume 11, Issue 1, 2022, Pages 59-74]
  • Mohd Nasir, Faarih Farhan Mohd Nasir Fabrication of Various Dimple Shapes and Arrays on a Hypereutectic Al-Si Alloy Using a Turning Process [Volume 11, Issue 1, 2022, Pages 75-81]
  • Mohemi, Enayatolah Evaluation of Damage Problems in the Water Pump Components of an Air Compressor Cooling System: a Case Study [Volume 5, Issue 3, 2016, Pages 13-21]
  • Mojoudi, Saeed Ranking of the Solutions of Reducing Electrical Energy Consumption in Isfahan Sepahan Cement Industry by Using Fuzzy TOPSIS Method [Volume 8, Issue 2, 2019, Pages 19-28]
  • Mokhatab Rafiei, Farimah Evaluating Organizational Performance Based on Safety Management Using Data Envelopment Analysis; Case Study: Isfahan Car Industry [Volume 2, Issue 3, 2013, Pages 19-30]
  • Molaie, Majid Colloids: Applications and Remaining Challenges [Volume 4, Issue 1, 2015, Pages 5-18]
  • Molla Ramezani, Navid Experimental Study of the Cutting Parameters Effect on Hole Making Processes in Hardened Steel [Volume 6, Issue 3, 2017, Pages 67-76]
  • Molla Ramzani, Navid Friction Stir Welding of Dissimilar Poly Methyl Methacrylate and Polycarbonate Sheets [Volume 6, Issue 4, 2017, Pages 35-46]
  • Montazerolghaem, Hamid Finite Element Simulation of Hydrostatic Extrusion Process to Produce Thin Bimetallic Parts [Volume 6, Issue 4, 2017, Pages 59-68]
  • Montazerolghaem, Hamid Manufacturing of Aluminum Thin Cylindrical Parts By Using Friction Stir Welding Method [Volume 7, Issue 1, 2018, Pages 21-28]
  • Moradi, Optimization of parameters of Anti lock Braking System for use in deep drawing [Volume 2, Issue 1, 2013, Pages 19-28]
  • Moradi, Alireza A New Hybrid Prediction Reduces the Bullwhip Effect of Demand in a Three-level Supply Chain [Volume 7, Issue 3, 2018, Pages 45-58]
  • Moradi, Mahmoud Numerical and Experimental Study of Geometrical Dimensions on Laser-TIG Hybrid Welding of Stainless Steel 1.4418 [Volume 5, Issue 2, 2016, Pages 21-31]
  • Moradi, Mahmoud Effect of Overage Hardening Heat Treatment on the Micro Structure and Hardness of Nickel-based Super Alloy Rene-80 [Volume 7, Issue 3, 2018, Pages 19-27]
  • Moradi, Mehran Analytical, Experimental and Finite Element Investigation of Internal Pressure Effect in Hydroforming Process on Metallic Bellows Produced from Thin Wall Tube of Austenitic Stainless Steel Grade 316L [Volume 2, Issue 1, 2013, Pages 9-14]
  • Moradi, Mehran Simulation of a Microgripper with Electrothermal Actuator Using COMSOL Software Based on the Finite Element Method [Volume 2, Issue 3, 2013, Pages 47-54]
  • Moradi, Shohreh Ranking of Outsourcing Risks in Supply Chain of Automotive Industry Using Fuzzy AHP and Fuzzy Inference System [Volume 8, Issue 1, 2019, Pages 5-18]
  • Moradlou, Hamid Implementation of Agile Manufacturing Principles in Small and Medium Enterprises (SMES) [Volume 4, Issue 3, 2015, Pages 31-44]
  • Morady Gohareh, Mehdy System Engineering Implementation Process for Super-Systems [Volume 7, Issue 1, 2018, Pages 67-78]
  • Morady Gohareh, Mehdy A Mixed Integer Nonlinear Programming for Facility Layout Problem with Maintenance Constraints [Volume 9, Issue 4, 2020, Pages 27-37]
  • Mosaedi, Farid A Novel Optimization Approach Applied to Multi-Pass Turning Process [Volume 6, Issue 2, 2017, Pages 5-19]
  • Mosavi, Sayed Ali Experimental Investigation of the Effect of Deionized Water on Surface Roughness of Near Dry Electro Discharge Machining of AISI D2 Steel [Volume 5, Issue 2, 2016, Pages 13-20]
  • Mosayebi, Masoud Optimal Trajectory Planning for an Industrial Mobile Robot using Optimal Control Theory [Volume 10, Issue 3, 2021, Pages 25-34]
  • Motevasseli, Hesam Investigation of Parameters Affecting Surface Integrity and Material Removal during Electrical Discharge Machining of HARDOX-400 Steel [Volume 9, Issue 2, 2020, Pages 73-84]
  • Mousavi, Sayed Ali Predicting Failure in the Hydraulic Lift Structures with Monitoring and Fuzzy Logic [Volume 3, Issue 2, 2014, Pages 37-46]
  • Mousavi, Sayed Ali Thickness Measuring of Thin Metal by Non Destructive with Fuzzy Logic Control System [Volume 4, Issue 4, 2015, Pages 39-45]
  • Mousavi, Sayed Ali Design and Construction of Electromechanical Wrist Hand Orthosis with a Functional Interface [Volume 7, Issue 4, 2018, Pages 57-70]
  • Mousavi, Seyed Alireza Investigation of Magnetic Abrasive Finishing on Inner Surface of AL 6061 Tube [Volume 4, Issue 3, 2015, Pages 23-30]

N

  • Nadali, Abolghasem Routing in a Wireless Multilayer Physical Network by Balanced Utilization Approach and Minimum Energy Using a Firefly Optimization Algorithm [Volume 8, Issue 2, 2019, Pages 73-86]
  • Nadali, Abolghasem Computer-based Regressor-free Adaptive Control versus Direct Adaptive Fuzzy Control of the Robotic System [Volume 8, Issue 3, 2019, Pages 67-83]
  • Nadali, Mahmood Computer-based Regressor-free Adaptive Control versus Direct Adaptive Fuzzy Control of the Robotic System [Volume 8, Issue 3, 2019, Pages 67-83]
  • Nadali, Maryam Computer-based Regressor-free Adaptive Control versus Direct Adaptive Fuzzy Control of the Robotic System [Volume 8, Issue 3, 2019, Pages 67-83]
  • Naeimi, Afshin Optimum Designing of Forging Preform Die for the H-shaped Parts Using Backward Deformation Method and Neural Networks Algorithm [Volume 3, Issue 3, 2014, Pages 79-96]
  • Naghibi, Mohammadreza Solving the Problem of Scheduling Unrelated Parallel Machines with Limited Access to Jobs [Volume 3, Issue 2, 2014, Pages 5-16]
  • Najafi, Esmaeil Performance Evaluation of Banking Organizations Using the New Proposed Integrated DEA-BSC Model [Volume 8, Issue 1, 2019, Pages 73-90]
  • Najafi, Mohammad Rasoul Development of Design and Manufacturing Support Tool for Optimization of Ultrasonic Machining (USM) and Rotary USM [Volume 3, Issue 2, 2014, Pages 59-74]
  • Namazikhah, Shayan Numerical and Experimental Investigation of Thickness Variation in the Spinning Process of Al-1060 Alloy [Volume 5, Issue 4, 2016, Pages 5-12]
  • Nasrollah, Amin A Numerical Investigation the Effects of the Voltage on the Displacement and Stress of Copper-based Ionic Polymer-Metal Composites [Volume 10, Issue 1, 2021, Pages 77-86]
  • Nemati Najafabadi, Vahid Investigating the Effect of Titanium Addition on the Microstructure and Mechanical Properties of Ni-Hard 4 Cast Iron [Volume 5, Issue 1, 2016, Pages 17-27]
  • Neshastegir Kashi, Amir The Effect of ECAP Die Helix Angle on the Microstructure Homogeneity of the Processed Samples by FEM Method [Volume 10, Issue 2, 2021, Pages 27-39]
  • Nikbakht, Mehrdad A Method for Ranking, Assessment and Evaluation of Sustainability Factors in Project [Volume 5, Issue 1, 2016, Pages 29-44]
  • Nikbakht, Mehrdad Cause and Effect Analysis of Risks of Refinery Developmental Turnkey Projects through System Dynamics Approach Case Study: Development Project of Third Distillation Unit and LPG (Liquefied Petroleum Gas) in Isfahan Oil Refinery [Volume 6, Issue 2, 2017, Pages 73-92]
  • Nikbakht, Mehrdad Ranking of the Solutions of Reducing Electrical Energy Consumption in Isfahan Sepahan Cement Industry by Using Fuzzy TOPSIS Method [Volume 8, Issue 2, 2019, Pages 19-28]
  • Nikbakht, Mehrdad Relationship between Technology Management and Operational Performance in Manufacturing Companies [Volume 6, Issue 4, 2017, Pages 69-79]
  • Nikbakht, Mehrdad Relationship Between Operational Performance in Industrial Manufacturing Companies with Approaches of Innovation, Quality, Efficiency and Productivity [Volume 7, Issue 1, 2018, Pages 29-38]
  • Nikbakht, Mehrdad Identification and Clustering Outsourcing Risks of Aviation Part- Manufacturing Projects in Aviation Industries Organization Using Kmeans Method [Volume 7, Issue 4, 2018, Pages 17-30]
  • Nikbakht, Merdad Identification and Ranking Green Supplier Selection Criteria Using One-Sample T-Test and FANP Methods: A Case Study for Petrochemical Industry [Volume 5, Issue 1, 2016, Pages 53-67]
  • Nikkhoo, Mohammad Numerical Simulation of Homogeneous, Two and Three Lattice Layers Scaffolds with Constant Density [Volume 9, Issue 2, 2020, Pages 5-22]
  • Niknam, Seyed Ali The Effect of Artificial Aging Treatment and Lubrication Modes on the Cutting Force and the Chip Surface Morphology when Drilling Al-Si-Mg (A356) Cast Alloys [Volume 7, Issue 1, 2018, Pages 39-48]
  • Noorbakhsh Samani, Seyede Parvane Organizational Agility and Knowledge Sharing Process in the Staffs of the Iran's Central Plateau Contractor Company [Volume 6, Issue 3, 2017, Pages 59-65]
  • Nosouhi, Mehdi Finite Element Analysis and Experimental Investigation on the Conventional and Vibration Assisted Drilling [Volume 6, Issue 4, 2017, Pages 23-33]
  • Nosouhi, Reza Development of a New Dynamic Friction Model for Analytical Modeling of Elliptical Vibration Assisted Turning Process [Volume 5, Issue 3, 2016, Pages 69-78]
  • Nosouhi, Reza Experimental Passive Suppression of the Regenerative Chatter Phenomenon by Variation of the Frequency and Amplitude of the Spindle Motor Excitation in Turning [Volume 5, Issue 4, 2016, Pages 13-19]
  • Nosouhi, Reza Design and Fabrication of a Longitudinal-Torsional Ultrasonic Transducer [Volume 6, Issue 1, 2017, Pages 25-31]
  • Nosouhi, Reza Numerical Analysis of Delamination Buckling in Composite Cylindrical Shell under Uniform External Pressure: Cohesive Element Method [Volume 6, Issue 3, 2017, Pages 77-96]
  • Nosouhi, Reza Finite Element Analysis and Experimental Investigation on the Conventional and Vibration Assisted Drilling [Volume 6, Issue 4, 2017, Pages 23-33]
  • Nosouhi, Reza Experimental Study of the Effect of Rotational Speed, Feed Rate, Lubricant and Tool Material in Friction Drilling of the Titanium Sheets [Volume 8, Issue 1, 2019, Pages 19-29]
  • Nosouhi, Reza Experimental Investigation of the Effects of the Roller Burnishing Parameters on the Surface Roughness and Micro-hardness of Ti6Al4V Alloy [Volume 8, Issue 3, 2019, Pages 57-66]
  • Nouri Hosseinabadi, Hossein Dry Friction and Wear Performance of Micro Surface Textures Generated by Ultrasonic Assisted Face Turning [Volume 5, Issue 4, 2016, Pages 21-33]

O

  • Ordikhani, Shahin Solving Re-entrant No-wait Flexible Flowshop Scheduling Problem; Using the Bottleneck-based Heuristic and Genetic Algorithm [Volume 7, Issue 2, 2018, Pages 65-77]
  • Ordikhani, Shahin Feature Selection in Big Data by Using the enhancement of Mahalanobis–Taguchi System; Case Study, Identifiying Bad Credit clients of a Private Bank of Islamic Republic of Iran [Volume 7, Issue 3, 2018, Pages 29-44]

P

  • Paktinat, Hossein Finite Element Analysis and Experimental Investigation on the Conventional and Vibration Assisted Drilling [Volume 6, Issue 4, 2017, Pages 23-33]
  • Parsafar, Mahdis The Effect of the Third Element on Corrosion Behavior and Phase Structure of Fe35Mn Alloy Fabricated by Spark Plasma Sintering (SPS) [Volume 7, Issue 4, 2018, Pages 31-39]
  • Pasamehr, Fatemeh Prioritization of Lean-production Components with Fuzzy Network Analysis: A Case Study (Sam Electric Co.) [Volume 8, Issue 1, 2019, Pages 31-44]
  • Payganeh, Gholamhasan Computer Aided Design of the Tube Hydroforming and Dual Hydroforming Processes [Volume 4, Issue 4, 2015, Pages 15-28]
  • Payganeh, Gholamhasan Numerical and Experimental Study of Residual Stress Measurement and Thickness Distribution of T-shape Steel Tube Produced by Tube Hydroforming [Volume 8, Issue 1, 2019, Pages 45-58]
  • Poorshaban, Reza The Effect of Power, Maximum Cutting Speed and Specific Point Energy on the Material Removal Rate and Cutting Volume Efficiency in CO2 Laser Cutting of Polyamide Sheets [Volume 9, Issue 3, 2020, Pages 23-39]
  • Poursafar, Amin Analysis of Surface Roughness and Micro-hardness in Roller Burnishing of Aluminum Alloy 6061 [Volume 8, Issue 3, 2019, Pages 5-12]
  • Poursina, Mehrdad Desiging, Part Selecting and Fabrication Procedure of the Vaccum Section of a Leaf Vacuum Shredder Machine [Volume 2, Issue 2, 2013, Pages 31-38]
  • Puladsaz, Kamran Machinability evaluation of Titanium alloy in Laser Assisted Turning [Volume 2, Issue 3, 2013, Pages 11-18]

Q

  • Quojo Quainoo, Andreas An Investigation on Formability and Crystallographic Texture in Novel Magnesium Alloys [Volume 10, Issue 3, 2021, Pages 19-24]

R

  • Rabiezadeh, Amin Production of Dispersed Ceramic Nano-Particles in Al Alloy Using Friction Stir Processing [Volume 5, Issue 3, 2016, Pages 41-57]
  • Rabiezadeh, Amin Effect of Coating Process Parameters on Corrosion Behavior of Ti-6Al-4V [Volume 9, Issue 1, 2020, Pages 33-42]
  • Rabiezadeh, Amin Failure Evaluation of Cupronickel Alloy Used in the Condenser of the Desalination Unit [Volume 11, Issue 1, 2022, Pages 21-40]
  • Rabi Yeganeh, Mostafa Design, Manufacturing and Surface quality Analysis of Machining by Self-Rotary Milling Tool [Volume 2, Issue 1, 2013, Pages 29-38]
  • Radi Najafabadi, Yahya Design and Fabrication of a Longitudinal-Torsional Ultrasonic Transducer [Volume 6, Issue 1, 2017, Pages 25-31]
  • Rahimi Asiabaraki, Hossein Improving the Hardness and Microstructural Properties of Piston Alloy Using the FSP Method [Volume 10, Issue 2, 2021, Pages 53-62]
  • Rahimzadeh, Ayub A New Hybrid Prediction Reduces the Bullwhip Effect of Demand in a Three-level Supply Chain [Volume 7, Issue 3, 2018, Pages 45-58]
  • Rahimzadeh, Ayub A Mathematical Model for Determining the Optimal Production Lot Size of Multiple Products on a Machine [Volume 8, Issue 4, 2019, Pages 67-75]
  • Rahmani, Ali Numerical Approach Toward Calculation of Vibration Characteristics of the Multi Axles Truck Using Lagrange Method [Volume 4, Issue 1, 2015, Pages 57-64]
  • Rahmani, Ali Study of Vibration Specifications of a Three-axle Truck Using Lagrange Method [Volume 8, Issue 2, 2019, Pages 5-17]
  • Rahmani, Azam Numerical and Experimental Study of Geometrical Dimensions on Laser-TIG Hybrid Welding of Stainless Steel 1.4418 [Volume 5, Issue 2, 2016, Pages 21-31]
  • Rahmani, Farzad Numerical and Experimental Investigation of Thickness Distribution in Hydromechanical Deep Drawing Process of Square Parts [Volume 10, Issue 2, 2021, Pages 5-12]
  • Rahmani, Mohsen Free Vibration Analysis of Sandwich Beams with FG Face Sheets Based on the High Order Sandwich Beam Theory [Volume 9, Issue 2, 2020, Pages 57-71]
  • Rahmani, Mohsen Temperature-dependent Vibration Analysis of Clamped-free Sandwich Beams with Porous FG Core [Volume 10, Issue 4, 2021, Pages 61-77]
  • Rahmatabadi, Davood Evaluation of Damage Problems in the Water Pump Components of an Air Compressor Cooling System: a Case Study [Volume 5, Issue 3, 2016, Pages 13-21]
  • Rahmati, Sadegh Numerical Simulation of Homogeneous, Two and Three Lattice Layers Scaffolds with Constant Density [Volume 9, Issue 2, 2020, Pages 5-22]
  • Rahnama, Golriz Ranking and Managing Stock in the Stock Market Using Fundamental and Technical Analyses [Volume 4, Issue 3, 2015, Pages 45-57]
  • Rahnama, Saeed Numerical Analysis of Delamination Buckling in Composite Cylindrical Shell under Uniform External Pressure: Cohesive Element Method [Volume 6, Issue 3, 2017, Pages 77-96]
  • Rajabi Jalal, Sajad Investigation of Parameters Effect Resin Movement Velocity at Vacuum Assisted Resin Transfer Molding Method (VARTM) [Volume 2, Issue 1, 2013, Pages 3-8]
  • Rajendran, T.K. A Solution for the Security Barrier of the Intelligent Manufacturing with Cloud Computing [Volume 10, Issue 4, 2021, Pages 27-35]
  • Rakhodaei, Hamid Computer Aided Design of the Tube Hydroforming and Dual Hydroforming Processes [Volume 4, Issue 4, 2015, Pages 15-28]
  • Ramezani, Mohammad Imperialist Competitive Algorithm (ICA) Approach for Optimization of the Surface Grinding Process [Volume 9, Issue 1, 2020, Pages 51-62]
  • Ranjbarzadeh, Ramin The Analysis of Experimental Process of Production, Stabilizing and Measurement of the Thermal Conductivity Coefficient of Water/Graphene Oxide as a Cooling Nanofluid in Machining [Volume 5, Issue 2, 2016, Pages 43-53]
  • Rastitalab, Abdolreza An Investigation of Using RCS-processed Intramedullary Stainless Steel 316L Nail in the Treatment of Diaphyseal Bone Fractures [Volume 10, Issue 3, 2021, Pages 59-75]
  • Rastitalab, Abdolreza Mechanical Stability of RCSed and ECAPed Intramedullary 316L Stainless Steel Nails in the Treatment of Diaphyseal Bone Fractures [Volume 10, Issue 4, 2021, Pages 37-49]
  • Razania, Ashkan An Investigation on Formability and Crystallographic Texture in Novel Magnesium Alloys [Volume 10, Issue 3, 2021, Pages 19-24]
  • Razavizadeh, Hekmat Investigation on Wear Behavior of W-Cu Nanocomposite Fabricated Through Thermochemical Synthesis [Volume 2, Issue 3, 2013, Pages 39-46]
  • Razfar, Mohammad Machinability Improvement of 17-4PH Stainless Steel by Cryogenic Cooling [Volume 2, Issue 3, 2013, Pages 31-38]
  • Razfar, Mohammad Reza Investigation of the Effective Parameters on Surface Roughness in Magnetic Abrasive Finishing Process Using Design of Experiments [Volume 3, Issue 1, 2014, Pages 17-25]
  • Razfar, Mohammad Reza Machinability Investigation of Inconel 657 in High-speed Turning [Volume 3, Issue 1, 2014, Pages 27-34]
  • Razfar, Mohammad Reza Micro Machining of AISI 440C Stainless Steel using Magnetic Field and Magnetic Abrasive Particles [Volume 3, Issue 2, 2014, Pages 17-26]
  • Rejali, Omid Numerical/Experimental Analysis of the Deformation of Tubes under Concentrated Load [Volume 6, Issue 3, 2017, Pages 35-46]
  • Rezaee, Behzad An Investigation on the Microstructure and Impression Creep Behavior of the Magnesium Alloys [Volume 9, Issue 1, 2020, Pages 43-49]
  • Rezaee Hajideh, Mojtaba A Hybrid Thermal Assisted Friction Stir Welding Approach for PMMA Sheets [Volume 6, Issue 2, 2017, Pages 51-60]
  • Rezaee Hajideh, Mojtaba Friction Stir Welding of Dissimilar Poly Methyl Methacrylate and Polycarbonate Sheets [Volume 6, Issue 4, 2017, Pages 35-46]
  • Rezaei Hajideh, Mojtaba Experimental Study of the Cutting Parameters Effect on Hole Making Processes in Hardened Steel [Volume 6, Issue 3, 2017, Pages 67-76]
  • Rezaie, Hamid Reza Investigation on Wear Behavior of W-Cu Nanocomposite Fabricated Through Thermochemical Synthesis [Volume 2, Issue 3, 2013, Pages 39-46]
  • Riahi, Ahmad The Milling of Metalsthrough Adaptive Neuro-FuzzyInference System (ANFIS) for non-touch Measuring of the Temperature to Reduce Coolant [Volume 9, Issue 2, 2020, Pages 23-30]
  • Riahi, Mohammad Formability Study of Steel Tailor laser Welded Blanks (TWB) in Stretch Forming [Volume 2, Issue 1, 2013, Pages 15-18]
  • Rikhtehgar Nezami, Vahid A Study on the Forming of Sheet Metal Parts Using Multi-Point Forming Technology [Volume 2, Issue 1, 2013, Pages 39-48]
  • Rouhani Esfahani, Amin Simulation of a Microgripper with Electrothermal Actuator Using COMSOL Software Based on the Finite Element Method [Volume 2, Issue 3, 2013, Pages 47-54]

S

  • Saadat, Mohammad Anti-swing Fuzzy Controller Design for a 3D Overhead Crane [Volume 4, Issue 2, 2015, Pages 57-66]
  • Saadat, Mohammad Dynamic Modeling of a Robot Manipulator for Opening the Tap Hole of an Electric Arc Furnace [Volume 8, Issue 4, 2019, Pages 17-24]
  • Saadat, Mohammad Path Planning and Control of an Industrial Robot Used for Opening Tap Hole of an Electric Arc Furnace [Volume 9, Issue 4, 2020, Pages 5-14]
  • Sabet, Ahmad Reza Manufacturing of Aluminum Thin Cylindrical Parts By Using Friction Stir Welding Method [Volume 7, Issue 1, 2018, Pages 21-28]
  • Sadeghamalnik, Morteza Development of Design and Manufacturing Support Tool for Optimization of Ultrasonic Machining (USM) and Rotary USM [Volume 3, Issue 2, 2014, Pages 59-74]
  • Sadegh Amalnik, Morteza Intelligent Knowledge Based System Approach for Optimization of Design and Manufacturing Process for Wire-Electrical Discharge Machining [Volume 4, Issue 1, 2015, Pages 29-44]
  • Sadegh Amalnik, Morteza Design of Computer Integrated Manufacturing System for Irankhodro Auto Industry [Volume 3, Issue 4, 2014, Pages 61-82]
  • Sadegh Amalnik, Morteza Intelligent Knowledge Based System Approach for Optimization of Design and Manufacturing for Abrasive Water Jet Machining [Volume 4, Issue 2, 2015, Pages 13-28]
  • Sadegh Amalnik, Morteza Controlling Electrochemical Machining By Using a Fuzzy Logic Approach [Volume 6, Issue 2, 2017, Pages 61-71]
  • Sadegh Amalnik, Morteza Optimization of Spindle loading and Tool Wear for CNC Turning Machine by Using Intelligent System [Volume 6, Issue 3, 2017, Pages 47-58]
  • Sadeghiyan, Molood Organizational Agility and Knowledge Sharing Process in the Staffs of the Iran's Central Plateau Contractor Company [Volume 6, Issue 3, 2017, Pages 59-65]
  • Sadegh Karimi, Mohammad The Recommend of Filler Metal to Increasing the Corrosion Resistance of Gas Pipeline [Volume 9, Issue 3, 2020, Pages 5-12]
  • Sadrnezhad, Sayed Khatibolah Performing a Calcium-Phosphate Layer on Porous NiTi Alloy for Using in Orthopedic Applications [Volume 2, Issue 4, 2013, Pages 45-50]
  • Safari, Aref A Novel Transformation Watershed Image Segmentation Model in Digital Elevation Maps Processing [Volume 9, Issue 3, 2020, Pages 13-22]
  • Safavipour, Mohammad Reza Experimental Study of Germanium Dry Machining with Various Rake Angles and Different Feed Rates of Tool [Volume 10, Issue 1, 2021, Pages 63-76]
  • Safavipour, Mohammad Reza Experimental Study of the Effect of Different Spindle Speeds and Feed Rates in Dry Machining on a Brittle Material [Volume 10, Issue 4, 2021, Pages 51-59]
  • Sahai, Ankit Deformation of Al Alloy during Integrated Extrusion and ECAP: A Simulation Research [Volume 10, Issue 3, 2021, Pages 35-44]
  • Sahebali, Effect of Temperature on Diffusion-Bonded Joint of AZ31 Magnesium and 7075 Aluminum Alloy [Volume 2, Issue 3, 2013, Pages 3-10]
  • Sajadi, Seyed Mojtaba Production Optimization on the Flow Shop Scheduling Problem: A Simulation Study [Volume 10, Issue 2, 2021, Pages 41-51]
  • Sajajid, Frahad Design and Fabrication of a Longitudinal-Torsional Ultrasonic Transducer [Volume 6, Issue 1, 2017, Pages 25-31]
  • Sajjady, Sayed Ali Numerical Analysis of Delamination Buckling in Composite Cylindrical Shell under Uniform External Pressure: Cohesive Element Method [Volume 6, Issue 3, 2017, Pages 77-96]
  • Sajjady, Sayed Ali The Effectiveness of Ceramic Wiper Tool in Turning of Monel K500 [Volume 7, Issue 2, 2018, Pages 47-64]
  • Saki Entezami, Saeed Experimental Study of Effective Parameters on Honing Process of Cast Iron Cylinder [Volume 4, Issue 3, 2015, Pages 5-12]
  • Salari, Mahdi Dissimilar Friction Stir Welding between Magnesium and Aluminum Alloys [Volume 9, Issue 3, 2020, Pages 65-72]
  • Salari, Mehdi Effect of Cold Rolling sequence on the Texture Development and Magnetic Loss of Grain Oriented Electrical Steels [Volume 3, Issue 3, 2014, Pages 41-52]
  • Salari, Mehdi Texture Evolution in Low Carbon Steel Fabricated by Multi-directional Forging of the Martensite Starting Structuree [Volume 8, Issue 4, 2019, Pages 5-15]
  • Salehi, Farshid Production Optimization on the Flow Shop Scheduling Problem: A Simulation Study [Volume 10, Issue 2, 2021, Pages 41-51]
  • Sattar, Majid Analytical, Experimental and Finite Element Investigation of Internal Pressure Effect in Hydroforming Process on Metallic Bellows Produced from Thin Wall Tube of Austenitic Stainless Steel Grade 316L [Volume 2, Issue 1, 2013, Pages 9-14]
  • Sattari, Meysam Design and Construction of Electromechanical Wrist Hand Orthosis with a Functional Interface [Volume 7, Issue 4, 2018, Pages 57-70]
  • Sayfi, Pirouz Identification and Ranking Green Supplier Selection Criteria Using One-Sample T-Test and FANP Methods: A Case Study for Petrochemical Industry [Volume 5, Issue 1, 2016, Pages 53-67]
  • Sedighi, Mohammad Using Rubber Pad Forming Process for Local Compression in Assembling of Vehicle Structure Tubes [Volume 2, Issue 2, 2013, Pages 15-22]
  • Seidi, Jamal Effect of Temperature on Diffusion-Bonded Joint of AZ31 Magnesium and 7075 Aluminum Alloy [Volume 2, Issue 3, 2013, Pages 3-10]
  • Seydali, Davood Stress Concentration Factor in a Functionally Graded Material Plate around a Hole [Volume 6, Issue 1, 2017, Pages 69-81]
  • Shadmanpoor, Arash Cause and Effect Analysis of Risks of Refinery Developmental Turnkey Projects through System Dynamics Approach Case Study: Development Project of Third Distillation Unit and LPG (Liquefied Petroleum Gas) in Isfahan Oil Refinery [Volume 6, Issue 2, 2017, Pages 73-92]
  • Shahbazi karami, Javad Experimental Investigation and Numerical Simulation of the Mechanical Behavior of a Novel Honeycomb Core Sandwich Panels Formed by Hydroforming Process [Volume 5, Issue 3, 2016, Pages 23-39]
  • Shahbazi Karami, Javad Computer Aided Design of the Tube Hydroforming and Dual Hydroforming Processes [Volume 4, Issue 4, 2015, Pages 15-28]
  • Shahbazi Karami, Javad Numerical and Experimental Study of Residual Stress Measurement and Thickness Distribution of T-shape Steel Tube Produced by Tube Hydroforming [Volume 8, Issue 1, 2019, Pages 45-58]
  • Shahbazi Karami, Javad Experimental Investigation and Analysis of Manufacturing Wind Turbine Blades Produced by Hydroforming of Aluminum Alloy AA5754 [Volume 5, Issue 2, 2016, Pages 69-79]
  • Shahhosseini, Masoud Impedance Control of Robots Using Voltage Control Strategy Revisited [Volume 7, Issue 1, 2018, Pages 49-66]
  • Shahhosseini, Masoud Task-space Control of Robots Using an Adaptive Taylor Series Uncertainty Estimator Revisited [Volume 7, Issue 4, 2018, Pages 71-80]
  • Shahin, Arash Analyzing Indexes of Agile Reverse logistics Using Interpretive Structural Modeling Approach [Volume 3, Issue 3, 2014, Pages 5-16]
  • Shahmirzaloo, Ali Experimental Study of the Cutting Parameters Effect on Hole Making Processes in Hardened Steel [Volume 6, Issue 3, 2017, Pages 67-76]
  • Shahmoradi, Mohsen Experimental Investigation and Analysis of Manufacturing Wind Turbine Blades Produced by Hydroforming of Aluminum Alloy AA5754 [Volume 5, Issue 2, 2016, Pages 69-79]
  • Shahrajabian, Hamzeh Investigation of Magnetic Abrasive Finishing on Inner Surface of AL 6061 Tube [Volume 4, Issue 3, 2015, Pages 23-30]
  • Shahrajabian, Hamzeh Machining Operation Parameters in Drilling Process; Variation of Thrust Forces in Epoxy Based Nanocomposites [Volume 5, Issue 3, 2016, Pages 5-11]
  • Shahrajabian, Hamzeh The Mechanical Properties of PA6/NBR/clay/CaCO3 Hybrid Nanocomposites [Volume 10, Issue 1, 2021, Pages 19-30]
  • Shahsavari, Mohammad Hossein Comparison of Hardness Values of Various specimens with different geometries and material properties after ECAP [Volume 3, Issue 3, 2014, Pages 61-78]
  • Shahsavari, Mohammad Hossein Evolution of Texture and Grain Size during Equal Channel Angular Extrusion of Pure Copper and 6012 Aluminum [Volume 4, Issue 4, 2015, Pages 47-58]
  • Shapurgan, Omid Friction Stir Welding of Dissimilar Poly Methyl Methacrylate and Polycarbonate Sheets [Volume 6, Issue 4, 2017, Pages 35-46]
  • Shapurgan, Sahar Effect of Electrical Current on Nitinol Medical Staples Shape Memory [Volume 2, Issue 2, 2013, Pages 47-55]
  • Shariati, Mahmoud Assessment of Third‌-order Shear Deformation Graphene Nanoplate Response under Static Loading Using Modified Couple Stress Theory [Volume 11, Issue 1, 2022, Pages 41-57]
  • Sharma, Shanti S. Deformation of Al Alloy during Integrated Extrusion and ECAP: A Simulation Research [Volume 10, Issue 3, 2021, Pages 35-44]
  • Sharudin, Muhammad Nor Investigation the Effects of Layer Structure on the Tribological Behaviour of PAI Overlays Containing MoS2 [Volume 10, Issue 4, 2021, Pages 5-11]
  • Shekarchizadeh, Ahmadreza Relationship between Technology Management and Operational Performance in Manufacturing Companies [Volume 6, Issue 4, 2017, Pages 69-79]
  • Shekarchizadeh, Ahmadreza Relationship Between Operational Performance in Industrial Manufacturing Companies with Approaches of Innovation, Quality, Efficiency and Productivity [Volume 7, Issue 1, 2018, Pages 29-38]
  • Sherafat, Abolfazl Designing a New Model for Evaluating the Maintenance System [Volume 6, Issue 1, 2017, Pages 49-67]
  • Shirani Bidabadi, Elham An Investigation on the Effect of Acidithiobacillus Ferrooxidans Bacteria on Biomachining of Titanium Alloy and Copper [Volume 9, Issue 1, 2020, Pages 25-32]
  • Shirneshan, Alireza Determination the Mechanical Stress on the Cutter Bar of the Harvesting Combine by Abaqus [Volume 4, Issue 2, 2015, Pages 47-56]
  • Shirneshan, Alireza Desiging, Part Selecting and Fabrication Procedure of the Vaccum Section of a Leaf Vacuum Shredder Machine [Volume 2, Issue 2, 2013, Pages 31-38]
  • Shirneshan, Alireza Assessment the Wear Properties of Biodiesel-diesel Blends with the Addition of Copper Oxide Nanoparticles [Volume 8, Issue 4, 2019, Pages 37-55]
  • Shirooyezad, Hadi Evaluating Organizational Performance Based on Safety Management Using Data Envelopment Analysis; Case Study: Isfahan Car Industry [Volume 2, Issue 3, 2013, Pages 19-30]
  • Shirouyehzad, Hadi A Comparison of Job-Shop and Group Technology Using Simulation by ARENA [Volume 3, Issue 1, 2014, Pages 59-66]
  • Shirouyehzad, Hadi Analyzing Indexes of Agile Reverse logistics Using Interpretive Structural Modeling Approach [Volume 3, Issue 3, 2014, Pages 5-16]
  • Shirouyehzad, Hadi A Comparison of Job-shop and Group Technology Using Simulation by ARENA [Volume 2, Issue 4, 2013, Pages 3-12]
  • Shirouyehzad, Hadi A Method for Ranking, Assessment and Evaluation of Sustainability Factors in Project [Volume 5, Issue 1, 2016, Pages 29-44]
  • Shojaei, Saeed Numerical Approach Toward Calculation of Vibration Characteristics of the Multi Axles Truck Using Lagrange Method [Volume 4, Issue 1, 2015, Pages 57-64]
  • Shojae Rezavi, Razavi Machinability evaluation of Titanium alloy in Laser Assisted Turning [Volume 2, Issue 3, 2013, Pages 11-18]
  • Sobhani, Siavash Experimental Study of Packing Time and Melt Temperature Effects on Shrinkage of a Thin Sheet Made of Wood-HDPE Composite [Volume 5, Issue 1, 2016, Pages 5-15]
  • Soleimanimehr, Hamid An Investigation on the Effect of Acidithiobacillus Ferrooxidans Bacteria on Biomachining of Titanium Alloy and Copper [Volume 9, Issue 1, 2020, Pages 25-32]
  • Soleimanimehr, Hamid An Investigation on the Microstructure and Impression Creep Behavior of the Magnesium Alloys [Volume 9, Issue 1, 2020, Pages 43-49]
  • Soleimanimehr, Hamid Design and Fabrication of a Longitudinal Vibration Transmitter for Ultrasonic-Vibration Assisted Milling [Volume 9, Issue 4, 2020, Pages 39-45]
  • Soleimanimehr, Hamid A Numerical Investigation the Effects of the Voltage on the Displacement and Stress of Copper-based Ionic Polymer-Metal Composites [Volume 10, Issue 1, 2021, Pages 77-86]
  • Soltani, Hasan Investigation of Magnetic Abrasive Finishing on Inner Surface of AL 6061 Tube [Volume 4, Issue 3, 2015, Pages 23-30]
  • Soltani, Mehrdad Survey of AZ31/HA-Zeolite Nano Crystalline Biocomposite with Powder Metallurgy (PM) [Volume 5, Issue 2, 2016, Pages 5-11]
  • Sousani, Hasan Mechanical Properties of Concrete Containing Tire Rubber Particles toward Constant Development [Volume 2, Issue 4, 2013, Pages 13-20]
  • Subramanyam, Shubram An Investigation on Formability and Crystallographic Texture in Novel Magnesium Alloys [Volume 10, Issue 3, 2021, Pages 19-24]

T

  • Taghizadeh, Behnam The Effect of Al2O3-MWCNT Hybrid Nanofluid on Surface Quality in Grinding of Inconel 600 [Volume 7, Issue 3, 2018, Pages 71-82]
  • Taghizadeh, Mojtaba Experimental Investigation of the Effect of Deionized Water on Surface Roughness of Near Dry Electro Discharge Machining of AISI D2 Steel [Volume 5, Issue 2, 2016, Pages 13-20]
  • Tahami, Seyed Rasoul Effect of Electrical Potential on the Morphology of Polyvinyl Alcohol/ Sodium Alginate Electrospun Nanofibers, Containing Herbal Extracts of Calendula Officinalis for Using in Biomedical Applications [Volume 9, Issue 2, 2020, Pages 43-56]
  • Tajaddara, Mehdi Machinability evaluation of Titanium alloy in Laser Assisted Turning [Volume 2, Issue 3, 2013, Pages 11-18]
  • Tajdari, Mehdi Simulation and Analysis of the New Brake System according to Changing of the Spring and Vertical Acceleration of the Wheels [Volume 5, Issue 4, 2016, Pages 57-70]
  • Taki, Kimia Design, Fabrication, and Assessment of a Hydrodynamic Reactor for Biodiesel Production [Volume 11, Issue 1, 2022, Pages 83-94]
  • Talebi Anaraki, Ali Numerical Analysis of the Effect of Sinusoidal Pressure Path on Thinning of Tube in Hot Metal Free Bulging Process [Volume 5, Issue 1, 2016, Pages 45-51]
  • Taouji Hassanpour, Saeed Scheduling Problem of Virtual Cellular Manufacturing Systems (VCMS); Using Simulated Annealing and Genetic Algorithm based Heuristics [Volume 3, Issue 4, 2014, Pages 45-60]
  • Tasouji Hassanpour, Saeed Solving Group Scheduling Problem in No-wait Flow Shop with Sequence Dependent Setup Times [Volume 3, Issue 1, 2014, Pages 5-16]
  • Tavakoli, Morteza Task-space Control of Electrically Driven Robots [Volume 7, Issue 4, 2018, Pages 5-15]
  • Tayebi, Moslem Evaluation of Damage Problems in the Water Pump Components of an Air Compressor Cooling System: a Case Study [Volume 5, Issue 3, 2016, Pages 13-21]
  • Toolani, Saeed Designing and Manufacturing the Multiple Jets Simulator and Experimental Investigation of the Multiple Jets in Crossflow [Volume 3, Issue 4, 2014, Pages 5-24]
  • Toolani, Saeed Design and Manufacturing of Jet to free Stream Simulator to Experimental Study of Interaction of Oblique Jet in Crossflow [Volume 4, Issue 1, 2015, Pages 65-81]
  • Towsyfyan, Hossain Optimization of Cutting Parameters Based on Production Time Using Colonial Competitive (CC) and Genetic (G) Algorithms [Volume 6, Issue 4, 2017, Pages 47-58]
  • Towsyfyan, Hossein A Novel Optimization Approach Applied to Multi-Pass Turning Process [Volume 6, Issue 2, 2017, Pages 5-19]

V

  • Vafaee Sefat, Abbas A Study on the Forming of Sheet Metal Parts Using Multi-Point Forming Technology [Volume 2, Issue 1, 2013, Pages 39-48]
  • Vahdati, Mahdi Effect of Overage Hardening Heat Treatment on the Micro Structure and Hardness of Nickel-based Super Alloy Rene-80 [Volume 7, Issue 3, 2018, Pages 19-27]
  • Vakili Sohrforozani, Ali A Study of Abrasive Media Effect on Deburring in Barrel Finishing Process [Volume 8, Issue 3, 2019, Pages 27-39]
  • Vasegh, Raha An Investigation on the Application of CNT-Aluminum Nanocomposite in Mechanical Alloying [Volume 9, Issue 4, 2020, Pages 47-59]
  • Vogel, Sven C. An Investigation on Formability and Crystallographic Texture in Novel Magnesium Alloys [Volume 10, Issue 3, 2021, Pages 19-24]

X

  • Xu, Ge Gentle Survey on MIR Industrial Service Robots: Review & Design [Volume 10, Issue 1, 2021, Pages 31-50]

Y

  • Yari, Rasoul Yari Empirical and Numerical Study of Gas Turbine Disks under Mechanical Stress and Temperature Gradient [Volume 8, Issue 2, 2019, Pages 57-72]
  • Yasemi, Hesameddin Effects of Tool Tilt Angle and Plunge Depth on Properties of Polycarbonate FSW Joint [Volume 7, Issue 4, 2018, Pages 41-55]
  • Yasini, Shiva Fabrication of Porous Segments Using Ti-6Al-4V Chips for Orthopaedic Applications [Volume 4, Issue 4, 2015, Pages 59-65]
  • Yazdani Nogarani, Mehran Experimental Study of the Effect of Rotational Speed, Feed Rate, Lubricant and Tool Material in Friction Drilling of the Titanium Sheets [Volume 8, Issue 1, 2019, Pages 19-29]
  • Yousefi, Afshin A New Hybrid Prediction Reduces the Bullwhip Effect of Demand in a Three-level Supply Chain [Volume 7, Issue 3, 2018, Pages 45-58]

Z

  • Zamani Ashani, Jamal Experimental Investigation of Effective Parameters at Laser Sintering the Mixture of Iron and Copper Powder [Volume 2, Issue 2, 2013, Pages 3-14]
  • Zamri, Wan Fathul Hakim W. Fabrication of Various Dimple Shapes and Arrays on a Hypereutectic Al-Si Alloy Using a Turning Process [Volume 11, Issue 1, 2022, Pages 75-81]
  • Zareh, Behrooz A Study on the Forming of Sheet Metal Parts Using Multi-Point Forming Technology [Volume 2, Issue 1, 2013, Pages 39-48]
  • Zarepour, Hamid An Experimental Investigation on Surface Roughness and Edge Chipping in Micro Ultrasonic Machining [Volume 5, Issue 4, 2016, Pages 45-56]
  • Zarepour, Hamid The Effect of Al2O3-MWCNT Hybrid Nanofluid on Surface Quality in Grinding of Inconel 600 [Volume 7, Issue 3, 2018, Pages 71-82]
  • Zarepour, Hamid Empirical and Numerical Study of Gas Turbine Disks under Mechanical Stress and Temperature Gradient [Volume 8, Issue 2, 2019, Pages 57-72]
  • Zeidi, Seyed Mohammad Javad Numerical Approach Toward Calculation of Vibration Characteristics of the Multi Axles Truck Using Lagrange Method [Volume 4, Issue 1, 2015, Pages 57-64]
  • Zeidi, Seyed Mohammad Javad Study of Vibration Specifications of a Three-axle Truck Using Lagrange Method [Volume 8, Issue 2, 2019, Pages 5-17]
  • Ziglari, Fateme Organizational Agility and Knowledge Sharing Process in the Staffs of the Iran's Central Plateau Contractor Company [Volume 6, Issue 3, 2017, Pages 59-65]
  • Zohoor, Mehdi Analytical and Numerical Investigation of Significant Parameters on Strength of Electromagnetically Assembled Aluminum Tube Joints [Volume 3, Issue 1, 2014, Pages 35-46]
  • Zohour, Mehdi Analytical and Numerical Investigation of Significant Parameters on Strength of Electromagnetically Assembled Products Joints [Volume 2, Issue 4, 2013, Pages 29-38]